Pull more clk updates from Stephen Boyd:
 "Another set of clk driver updates and fixes for the merge window. The
  driver updates needed more time to bake in linux-next.

  Updates:
   - Support for more clk controllers in Qualcomm SoCs such as SM8350,
     SM8450, SDX75, SC8280XP, and IPQ9574
   - Runtime PM enablement of some more Qualcomm clk controllers
   - Various fixes to Qualcomm clk driver data to use correct clk_ops
     and to check halt bits properly
   - AT91 updates to modernize with clk_parent_data structures

  Fixes:
   - Remove 'syscon' from dt binding fix for ti,j721e-system-controller
   - Fix determine rate in the Tegra driver that got wrecked by the
     refactorting of muxes this merge window"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
  clk: tegra: Avoid calling an uninitialized function
  dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  ...

Pull new ARM SoC support from Arnd Bergmann:
 "There are two new SoC families this time, and both appear fairly
  similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
  both dual-core Cortex-A35 based chips for the low-power industrial
  embedded market, and they mark the first 64-bit product in a widely
  used family of 32-bit Arm MCUs and SoCs.

  The way into the kernel is completely different here: The team at ST
  has a long history of working upstream with their STM32MP1 and other
  SoCs, and they produced a complete port to arm64 together with the
  initial announcement. Nuvoton also has multiple SoC product lines with
  current or previous upstream support, but those are maintained by
  third parties and are unrelated. The patch series from Nuvoton's Jacky
  Huang had to go through many revisisions to get to this point and is
  still missing a few drivers including the serial port for the moment.

  The branch contains the devicetree files as well as all the code
  changes, in order to have something that can be tested standalone"

* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  clk: nuvoton: Use clk_parent_data instead of string for parent clock
  clk: nuvoton: Update all constant hex values to lowercase
  clk: nuvoton: Add clk-ma35d1.h for driver extern functions
  remoteproc: stm32: use correct format strings on 64-bit
  MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
  arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
  arm64: dts: st: add stm32mp257f-ev1 board support
  dt-bindings: stm32: document stm32mp257f-ev1 board
  arm64: dts: st: introduce stm32mp25 pinctrl files
  arm64: dts: st: introduce stm32mp25 SoCs family
  arm64: introduce STM32 family on Armv8 architecture
  dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
  pinctrl: stm32: add stm32mp257 pinctrl support
  dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
  Documentation/process: add soc maintainer handbook
  reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
  reset: Add Nuvoton ma35d1 reset driver support
  clk: nuvoton: Add clock driver for ma35d1 clock controller
  arm64: dts: nuvoton: Add initial ma35d1 device tree
  dt-bindings: serial: Document ma35d1 uart controller
  ...

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "The biggest change this time is for the 32-bit devicetree files, which
  are all moved to a new location, using separate subdirectories for
  each SoC vendor, following the same scheme that is used on arm64, mips
  and riscv. This has been discussed for many years, but so far we never
  did this as there was a plan to move the files out of the kernel
  entirely, which has never happened.

  The impact of this will be that all external patches no longer apply,
  and anything depending on the location of the dtb files in the build
  directory will have to change. The installed files after 'make
  dtbs_install' keep the current location.

  There are six added SoCs here that are largely variants of previously
  added chips. Two other chips are added in a separate branch along with
  their device drivers.

   - The Samsung Exynos 4212 makes its return after the Samsung Galaxy
     Express phone is addded at last. The SoC support was originally
     added in 2012 but removed again in 2017 as it was unused at the
     time.

   - Amlogic C3 is a Cortex-A35 based smart IP camera chip

   - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
     the still common MSM8916 (Snapdragon 410) phone chip that has been
     supported for a long time.

   - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
     laptop chips, used in the Lenovo Flex 5G, which is added along with
     the reference board.

   - Qualcomm SDX75 is the latest generation modem chip that is used as
     a peripherial in phones but can also run a standalone Linux. Unlike
     the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

   - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
     Xuantie C910 core, a step up from all previously added rv64 chips.

  All of the above come with reference board implementations, those
  included there are 39 new board files, but only five more 32-bit this
  time, probably a new low:

   - Marantec Maveo board based on dhcor imx6ull module

   - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

   - Epson Moverio BT-200 AR glasses based on TI OMAP4

   - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

   - ICnova ADB4006 board based on Allwinner A20

  On the 64-bit side, there are also fewer addded machines than we had
  in the recent releases:

   - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
     EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

   - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

   - Qualcomm gains support for 6 reference boards on various members of
     their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
     phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
     of the various reference platforms for their new chips.

   - Rockchips support for several newer boards: Indiedroid Nova
     (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
     NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
     Fastrhino R66S/R68S (rk3568)

   - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
     Verdin family with AM62 COM, carrier and dev boards

  Other changes to existing boards contain the usual minor improvements
  along with

   - continued updates to clean up dts files based on dtc warnings and
     binding checks, in particular cache properties and node names

   - support for devicetree overlays on at91, bcm283x

   - significant additions to existing SoC support on mediatek,
     qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
     STM32MP1

  As usual, a lot more detail is available in the individual merge
  commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
  ARM: mvebu: fix unit address on armada-390-db flash
  ARM: dts: Move .dts files to vendor sub-directories
  kbuild: Support flat DTBs install
  ARM: dts: Add .dts files missing from the build
  ARM: dts: allwinner: Use quoted #include
  ARM: dts: lan966x: kontron-d10: add PHY interrupts
  ARM: dts: lan966x: kontron-d10: fix SPI CS
  ARM: dts: lan966x: kontron-d10: fix board reset
  ARM: dts: at91: Enable device-tree overlay support for AT91 boards
  arm: dts: Enable device-tree overlay support for AT91 boards
  arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
  ARM: dts: at91: use generic name for shutdown controller
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for TP-Link HC220 G5 v1

 - add support for Wifi/Bluetooth on CI20

 - rework Ralink clock and reset handling

 - cleanups and fixes

* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
  MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
  MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
  MIPS: OCTEON: octeon-usb: cleanup divider calculation
  MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
  MIPS: OCTEON: octeon-usb: move gpio config to separate function
  MIPS: OCTEON: octeon-usb: use bitfields for shim register
  MIPS: OCTEON: octeon-usb: use bitfields for host config register
  MIPS: OCTEON: octeon-usb: use bitfields for control register
  MIPS: OCTEON: octeon-usb: add all register offsets
  mips: ralink: match all supported system controller compatible strings
  MIPS: dec: prom: Address -Warray-bounds warning
  MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
  clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
  mips: ralink: introduce commonly used remap node function
  mips: pci-mt7620: use dev_info() to log PCIe device detection result
  mips: pci-mt7620: do not print NFTS register value as error log
  MAINTAINERS: add Mediatek MTMIPS Clock maintainer
  mips: ralink: get cpu rate from new driver code
  mips: ralink: remove reset related code
  mips: ralink: mt7620: remove clock related code
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Add some missing type definitions to properties

   - Drop unneeded quotes and use absolute paths in bindings

   - Remove redundant "binding" or "schema" in binding titles

   - Add bindings for Ralink SoCs interrupt controller, QCA2066
     Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
     lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
     ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52

  DT core:

   - Improve the reserved-memory range allocation to maximize contiguous
     space

   - Use device_set_node() helper in place of open coding"

* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
  dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
  dt-bindings: PCI: dwc: rockchip: Update for RK3588
  dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
  dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
  dt-bindings: pwm: drop unneeded quotes
  dt-bindings: crypto: drop unneeded quotes
  dt-bindings: arm: socionext: add Synquacer platforms
  dt-bindings: connector: usb: allow a single HS port
  dt-bindings: bus: ti-sysc: fix typo
  of: reserved_mem: Use stable allocation order
  of: reserved_mem: Try to keep range allocations contiguous
  dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
  dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
  dt-bindings: dvfs: drop unneeded quotes
  dt-bindings: gpu: drop unneeded quotes
  dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
  dt-bindings: rockchip: grf: drop unneeded quotes
  dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
  dt-bindings: Remove last usage of "binding" or "schema" in titles
  dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
  ...

Pull clk updates from Stephen Boyd:
 "This batch of clk driver updates contains almost no new SoC support.
  Instead there's a treewide patch series from Maxime that makes
  clk_ops::determine_rate mandatory for muxes.

  Beyond that core framework change we have the usual pile of clk driver
  updates such as migrating i2c drivers to use .probe() again or
  YAMLfication of clk DT bindings so we can validate DTBs.

  Overall the SoCs that got the most updates this time around in terms
  of diffstat are the Amlogic and Mediatek drivers because they added
  new SoC support or fixed up various drivers to have proper data.

  In general things look kinda quiet. I suspect the core framework
  change may still shake out some problems after the merge window,
  mostly because not everyone tests linux-next where that series has
  been for some number of weeks. I saw that there's at least one pending
  fix for Tegra that needs to be wrapped up into a proper patch. I'll
  try to catch those bits before the window closes so that -rc1 is
  bootable. More details below.

  Core:
   - Make clk_ops::determine_rate mandatory for muxes

  New Drivers:
   - Add amlogic a1 SoC family PLL and peripheral clock controller support

  Updates:
   - Handle allocation failures from kasprintf() and friends
   - Migrate platform clk drivers to .remove_new()
   - Migrate i2c clk drivers to .probe() instead of .probe_new()
   - Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
   - Add infra_ao reset support for Mediatek MT8188 SoCs
   - Align driver_data to i2c_device_id tables in some i2c clk drivers
   - Use device_get_match_data() in vc5 clk driver
   - New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
     FPGA clock drivers
   - Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
     boolean DT property in clk-pic32mzda
   - Convert AT91 clock dt-bindings to YAML
   - Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
   - Keep i.MX UART clocks enabled during kernel boot if earlycon is set
   - Drop imx_unregister_clocks() as there are no users anymore
   - Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
     after free
   - Add determine_rate op to the imx8m composite clock
   - Use device managed API for iomap and kzalloc for i.MXRT1050,
     i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
   - Add missing interrupt DT property for the i.MX8M clock controller
   - Re-add support for Exynos4212 clock controller because we are
     re-introducing the SoC in the mainline
   - Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
     some objtool warnings
   - Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
   - Convert the Renesas clock drivers to readl_poll_timeout_atomic()
   - Add PWM clock on Renesas R-Car V3U
   - Fix PLL5 on Renesas RZ/G2L and RZ/V2L"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
  clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
  clk: Fix memory leak in devm_clk_notifier_register()
  clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
  clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
  MAINTAINERS: Add Marvell mvebu clock drivers
  clk: clocking-wizard: check return value of devm_kasprintf()
  clk: ti: clkctrl: check return value of kasprintf()
  clk: keystone: sci-clk: check return value of kasprintf()
  clk: si5341: free unused memory on probe failure
  clk: si5341: check return value of {devm_}kasprintf()
  clk: si5341: return error if one synth clock registration fails
  clk: cdce925: check return value of kasprintf()
  clk: vc5: check memory returned by kasprintf()
  clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
  clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
  clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
  clk: keystone: syscon-clk: Add support for audio refclk
  dt-bindings: clock: Add binding documentation for TI Audio REFCLK
  dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
  clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
  ...

* clk-qcom: (63 commits)
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  clk: qcom: gcc-ipq6018: remove duplicate initializers
  clk: qcom: gcc-ipq9574: Enable crypto clocks
  dt-bindings: clock: Add crypto clock and reset definitions
  clk: qcom: Add lpass audio clock controller driver for SC8280XP
  clk: qcom: Add lpass clock controller driver for SC8280XP
  dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
  dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
  dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
  clk: qcom: gpucc-sm8550: Add support for graphics clock controller
  clk: qcom: Add support for SM8450 GPUCC
  clk: qcom: gcc-sm8450: Enable hw_clk_ctrl
  clk: qcom: rcg2: Make hw_clk_ctrl toggleable
  dt-bindings: clock: qcom: Add SM8550 graphics clock controller
  ...

* clk-microchip:
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw

Merge the missing SC8280XP LPASS DeviceTree changes, which where brought
in through a topic branch in order to be shared with the DeviceTree
source files, but not merged into the clock tree until now.

 - Handle allocation failures from kasprintf() and friends

* clk-imx:
  clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
  clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
  clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
  dt-bindings: clock: imx8m: Add missing interrupt property
  clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
  clk: imx: composite-8m: Add imx8m_divider_determine_rate
  clk: imx: scu: use _safe list iterator to avoid a use after free
  clk: imx: drop imx_unregister_clocks
  clk: imx6ul: retain early UART clocks during kernel init
  clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks

* clk-microchip:
  dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
  dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
  clk: microchip: Use of_property_read_bool() for boolean properties
  clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE

* clk-cleanup:
  clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
  clk: Fix memory leak in devm_clk_notifier_register()
  clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
  clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
  MAINTAINERS: Add Marvell mvebu clock drivers
  clk: mvebu: Use of_address_to_resource()
  clk: tegra: tegra124-emc: Fix potential memory leak
  clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
  clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks()
  clk: sifive: Use devm_platform_ioremap_resource()

* clk-bindings:
  dt-bindings: clock: drop unneeded quotes and use absolute /schemas path
  dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC

* clk-ti:
  clk: keystone: syscon-clk: Add support for audio refclk
  dt-bindings: clock: Add binding documentation for TI Audio REFCLK
  dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
  clk: keystone: syscon-clk: Allow the clock node to not be of type syscon

* clk-kasprintf:
  clk: clocking-wizard: check return value of devm_kasprintf()
  clk: ti: clkctrl: check return value of kasprintf()
  clk: keystone: sci-clk: check return value of kasprintf()
  clk: si5341: free unused memory on probe failure
  clk: si5341: check return value of {devm_}kasprintf()
  clk: si5341: return error if one synth clock registration fails
  clk: cdce925: check return value of kasprintf()
  clk: vc5: check memory returned by kasprintf()

 - Make clk_ops::determine_rate mandatory for muxes

* clk-renesas:
  clk: renesas: rzg2l: Convert to readl_poll_timeout_atomic()
  clk: renesas: mstp: Convert to readl_poll_timeout_atomic()
  clk: renesas: cpg-mssr: Convert to readl_poll_timeout_atomic()
  iopoll: Do not use timekeeping in read_poll_timeout_atomic()
  iopoll: Call cpu_relax() in busy loops
  clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register write
  clk: renesas: r8a779a0: Add PWM clock

* clk-determine-rate: (71 commits)
  clk: sprd: composite: Simplify determine_rate implementation
  ASoC: tlv320aic32x4: pll: Remove impossible condition in clk_aic32x4_pll_determine_rate()
  clk: Fix best_parent_rate after moving code into a separate function
  clk: Forbid to register a mux without determine_rate
  ASoC: tlv320aic32x4: div: Switch to determine_rate
  ASoC: tlv320aic32x4: pll: Switch to determine_rate
  clk: tegra: super: Switch to determine_rate
  clk: tegra: periph: Switch to determine_rate
  clk: stm32: composite: Switch to determine_rate
  clk: st: flexgen: Switch to determine_rate
  clk: sprd: composite: Switch to determine_rate
  clk: ingenic: tcu: Switch to determine_rate
  clk: ingenic: cgu: Switch to determine_rate
  clk: imx: scu: Switch to determine_rate
  clk: da8xx: clk48: Switch to determine_rate
  clk: si5351: clkout: Switch to determine_rate
  clk: si5351: msynth: Switch to determine_rate
  clk: si5351: pll: Switch to determine_rate
  clk: si5341: Switch to determine_rate
  clk: cdce706: clkout: Switch to determine_rate
  ...

* clk-allwinner:
  clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux

* clk-samsung:
  clk: samsung: add CONFIG_OF dependency
  clk: samsung: Re-add support for Exynos4212 CPU clock
  clk: samsung: Add Exynos4212 compatible to CLKOUT driver
  dt-bindings: clock: samsung,exynos: add Exynos4212 clock compatible

* clk-amlogic:
  MAINTAINERS: repair pattern in ARM/Amlogic Meson SoC CLOCK FRAMEWORK
  clk: meson: pll: remove unneeded semicolon
  clk: meson: a1: Staticize rtc clk
  clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
  clk: meson: a1: add Amlogic A1 PLL clock controller driver
  clk: meson: introduce new pll power-on sequence for A1 SoC family
  clk: meson: make pll rst bit as optional
  dt-bindings: clock: meson: add A1 Peripherals clock controller bindings
  dt-bindings: clock: meson: add A1 PLL clock controller bindings