Pull clk updates from Stephen Boyd:
 "This is the usual collection of primarily clk driver updates.

  The big part of the diff is all the new Qualcomm clk drivers added for
  a few SoCs they're working on. The other two vendors with significant
  work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
  to existing drivers and supports some new SoCs while Amlogic is
  starting a significant refactoring to simplify their code.

  The core framework gained a pair of helpers to get the 'struct device'
  or 'struct device_node' associated with a 'struct clk_hw'. Some
  associated KUnit tests were added for these simple helpers as well.

  Beyond that core change there are lots of little fixes throughout the
  clk drivers for the stuff we see every day, wrong clk driver data that
  affects tree topology or supported frequencies, etc. They're not found
  until the clks are actually used by some consumer device driver.

  New Drivers:
   - Global, display, gpu, video, camera, tcsr, and rpmh clock
     controller for the Qualcomm Milos SoC
   - Camera, display, GPU, and video clock controllers for Qualcomm
     QCS615
   - Video clock controller driver for Qualcomm SM6350
   - Camera clock controller driver for Qualcomm SC8180X
   - I3C clocks and resets on Renesas RZ/G3E
   - Expanded Serial Peripheral Interface (xSPI) clocks and resets on
     Renesas RZ/V2H(P) and RZ/V2N
   - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
   - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
   - Ethernet clocks and resets on Renesas RZ/G3E
   - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
     (R9A09G087) SoCs
   - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
   - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
     RZ/V2N

  Updates:
   - Support atomic PWMs in the PWM clk driver
   - clk_hw_get_dev() and clk_hw_get_of_node() helpers
   - Replace round_rate() with determine_rate() in various clk drivers
   - Convert clk DT bindings to DT schema format for DT validation
   - Various clk driver cleanups and refactorings from static analysis
     tools and possibly real humans
   - A lot of little fixes here and there to things like clk tree
     topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
  clk: clocking-wizard: Fix the round rate handling for versal
  clk: Fix typos
  clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
  clk: tegra: periph: Make tegra_clk_periph_ops static
  clk: tegra: periph: Fix error handling and resolve unsigned compare warning
  clk: imx: scu: convert from round_rate() to determine_rate()
  clk: imx: pllv4: convert from round_rate() to determine_rate()
  clk: imx: pllv3: convert from round_rate() to determine_rate()
  clk: imx: pllv2: convert from round_rate() to determine_rate()
  clk: imx: pll14xx: convert from round_rate() to determine_rate()
  clk: imx: pfd: convert from round_rate() to determine_rate()
  clk: imx: frac-pll: convert from round_rate() to determine_rate()
  clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
  clk: imx: fixup-div: convert from round_rate() to determine_rate()
  clk: imx: cpu: convert from round_rate() to determine_rate()
  clk: imx: busy: convert from round_rate() to determine_rate()
  clk: imx: composite-93: remove round_rate() in favor of determine_rate()
  clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
  clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
  clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
  ...

Pull MFD updates from Lee Jones:
 "New Support & Features:

   - Add extensive support for the Analog Devices ADP5589 I/O expander,
     including core MFD, GPIO, PWM, and a new keypad matrix input
     driver. This also adds support for handling various events
     including GPI, keypad, reset and unlock ev ents

   - Add support for the TI TPS652G1 PMIC, a stripped-down version of
     the TPS65224, including core MFD, PFSM, pinctrl, and GPIO support

   - Add support for the Apple Silicon System Management Controller
     (SMC), including the core MFD driver which handles the RTKit-based
     protocol, a new GPIO driver for PMU GPIOs, and a new
     reboot/power-off driver.

  Improvements & Fixes:

   - Dynamically add ADP5585 sub-devices based on device tree properties

   - Move ADP5585 oscillator control from the child PWM driver to the
     main MFD driver to better handle shared resources

   - Add support for a hardware reset pin and VDD regulator to the
     ADP5585 driver

   - Update the TPS65219 MFD cell's GPIO compatible string for the
     TPS65214 to reflect hardware capabilities correctly

   - Separate the ChromeOS EC charge-control probing from the USB-PD
     subsystem, allowing it to probe independently based on the
     dedicated EC_FEATURE_CHARGER

   - Fix an interrupt naming typo in the MT6370 driver

   - Fix RK806 PMIC reset behavior by allowing the reset mode to be
     customized via a new device tree property

   - Fix AXP20X regulator cell ID conflicts for secondary PMICs on
     boards without an IRQ line connected

   - Fix MT6397 keypad sub-device creation to use specific names instead
     of a generic one, ensuring correct driver binding

   - Fix a build warning in the stm32-timers driver by adding a missing
     include for export.h.

  Cleanups & Refactoring:

   - Refactor the ADP5585 driver to simplify how regmap defaults are
     handled, making it easier to add new chip variants

   - Introduce per-chip register map structures for the ADP5585/ADP5589
     family to handle differences between the devices

   - Convert several drivers to use dev_fwnode() instead of
     of_fwnode_handle()

   - Make various static structures const in the cs40l50, rohm-bd71828,
     tps65219, and twl6040 drivers

   - Remove redundant pm_runtime_mark_last_busy() calls from several
     drivers

   - Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers

   - Remove unused fields from the 'tps65219' struct

   - Update several MFD-related headers to follow the 'Include What You
     Use' (IWYU) principle.

  Removals:

   - Remove the old, platform-data-based adp5589-keys input driver,
     which is now superseded by the new MFD-based adp5585-keys driver

   - Remove the unused twl6030_mmc_card_detect() functions and
     associated header declarations

   - Remove the now unused pcf50633/core.h header file

   - Remove the fsl,imx8qxp-csr device tree binding, which was being
     used incorrectly.

  Device Tree Bindings Updates:

   - Add support for the Analog Devices ADP5589 I/O expander to the
     adi,adp5585.yaml binding

   - Add new properties to the adi,adp5585.yaml binding for input
     events, including keypad pins, unlock events, and reset events

   - Add a reset-gpios property to the adi,adp5585.yaml binding

   - Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding

   - Add new bindings for the Apple Mac System Management Controller
     (SMC) and its sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and
     apple,smc-reboot.yaml

   - Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema
     format

   - Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY
     bindings into a single YAML schema file

   - Convert the TI TPS65910 binding to YAML schema format

   - Add a comment to the samsung,s2mps11.yaml binding to clarify the
     use of 'oneOf' for interrupt properties

   - Add the rockchip,reset-mode property to the rockchip,rk806.yaml
     binding to allow customization of the PMIC's reset behavior"

* tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
  mfd: dt-bindings: Convert TPS65910 to DT schema
  mfd: Minor Cirrus/Maxim Kconfig order fixes
  mfd: Remove redundant pm_runtime_mark_last_busy() calls
  mfd: mt6397: Do not use generic name for keypad sub-devices
  mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is present
  mfd: mt6370: Fix the interrupt naming typo
  mfd: rk8xx-core: Allow to customize RK806 reset mode
  dt-bindings: mfd: rk806: Allow to customize PMIC reset mode
  mfd: syscon: atmel-smc: Don't use "proxy" headers
  mfd: madera: Don't use "proxy" headers
  mfd: wm8350-core: Don't use "proxy" headers
  dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts properties
  mfd: davinci_voicecodec: Don't use "proxy" headers
  mfd: pcf50633: Remove the header file core.h
  mfd: tps65219: Remove another unused field from 'struct tps65219'
  mfd: tps65219: Remove an unused field from 'struct tps65219'
  mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_data
  mfd: rohm-bd71828: Constify some structures
  dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentation
  mfd: axp20x: Set explicit ID for AXP313 regulator
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - DT updates for ralink, mobileye and atheros/qualcomm

 - Clean up of mc146818 usage

 - Speed up delay calibration for CPS

 - Other cleanups and fixes

* tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits)
  MIPS: Don't use %pK through printk
  MIPS: Update Joshua Kinard's e-mail address
  MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller
  MIPS: mm: tlb-r4k: Uniquify TLB entries on init
  MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free()
  mips/malta,loongson2ef: use generic mc146818_get_time function
  mips: remove redundant macro mc146818_decode_year
  mips/mach-rm: remove custom mc146818rtc.h file
  mips: remove unused function mc146818_set_rtc_mmss
  MIPS: CPS: Optimise delay CPU calibration for SMP
  MIPS: CPS: Improve mips_cps_first_online_in_cluster()
  MIPS: disable MMID when not supported by the hardware
  MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver
  MIPS: eyeq5_defconfig: add GPIO subsystem & driver
  MIPS: mobileye: eyeq5: add two GPIO bank nodes
  MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor
  MIPS: mobileye: eyeq5: add 5 I2C controller nodes
  MIPS: eyeq5_defconfig: Update for v6.16-rc1
  MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}
  mips: boot: use 'targets' instead of extra-y in Makefile
  ...

Resolve conflicts with i.MX95 changes 88768d6f8c13 ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a448d ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.

* clk-fixes:
  clk: sunxi-ng: v3s: Fix TCON clock parents
  clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
  clk: sunxi-ng: v3s: Fix CSI SCLK clock name
  dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
  clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
  clk: scmi: Handle case where child clocks are initialized before their parents
  clk: sunxi-ng: a523: Mark MBUS clock as critical

* clk-rockchip:
  clk: rockchip: rk3568: Add PLL rate for 132MHz

* clk-thead:
  clk: thead: th1520-ap: Describe mux clocks with clk_mux
  clk: thead: th1520-ap: Correctly refer the parent of osc_12m
  clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED

* clk-microchip:
  clk: at91: sam9x7: update pll clk ranges

* clk-imx:
  MAINTAINERS: Update i.MX Clock Entry
  clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR
  clk: imx95-blk-ctl: Rename lvds and displaymix csr blk
  clk: imx95-blk-ctl: Fix synchronous abort
  dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR
  clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data

* clk-qcom: (65 commits)
  dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom: Remove double colon from description
  clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Video Clock Controller
  clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos GPU Clock Controller
  clk: qcom: Add Display Clock controller (DISPCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Display Clock Controller
  clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Camera Clock Controller
  clk: qcom: Add Global Clock controller (GCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Global Clock Controller
  clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe
  clk: qcom: gcc-x1e80100: Add missing video resets
  dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets
  clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100
  clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC
  ...

* clk-renesas: (42 commits)
  clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
  clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
  clk: renesas: r9a09g057: Add XSPI clock/reset
  clk: renesas: r9a09g056: Add XSPI clock/reset
  clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
  clk: renesas: r9a09g057: Add support for xspi mux and divider
  clk: renesas: r9a09g056: Add support for xspi mux and divider
  clk: renesas: r9a09g077: Add RIIC module clocks
  clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
  clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
  clk: renesas: r9a09g057: Add entries for the RSPIs
  dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
  dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
  clk: renesas: rzv2h: Add missing include file
  clk: renesas: rzv2h: Use devm_kmemdup_array()
  clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
  clk: renesas: r9a09g077: Add PCLKL core clock
  dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
  dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
  dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
  ...

* clk-samsung:
  clk: samsung: exynosautov920: add block hsi2 clock support
  dt-bindings: clock: exynosautov920: add hsi2 clock definitions
  dt-bindings: clock: exynosautov920: sort clock definitions
  clk: samsung: exynos850: fix a comment
  clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock
  clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD

* clk-spacemit:
  clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
  reset: spacemit: add support for SpacemiT CCU resets
  clk: spacemit: mark K1 pll1_d8 as critical
  clk: spacemit: define three reset-only CCUs
  clk: spacemit: set up reset auxiliary devices
  soc: spacemit: create a header for clock/reset registers
  dt-bindings: soc: spacemit: define spacemit,k1-ccu resets

* clk-allwinner:
  clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate()
  clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate()
  clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate()
  clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate()
  clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll
  clk: sunxi-ng: v3s: Fix de clock definition
  clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
  dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset

* clk-amlogic:
  clk: amlogic: s4: remove unused data
  clk: amlogic: drop clk_regmap tables
  clk: amlogic: get regmap with clk_regmap_init
  clk: amlogic: remove unnecessary headers
  clk: amlogic: axg-audio: use the auxiliary reset driver

Pull SoC devicetree updates from Arnd Bergmann:
 "There are a few new variants of existing chips:

   - mt6572 is an older mobile phone chip from mediatek that was
     extremely popular a decade ago but never got upstreamed until now

   - exynos2200 is a recent high-end mobile phone chip used in a few
     Samsung phones like the Galaxy S22

   - Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
     (R8A779H0) and used in automotive applications

   - Tegra264 is a new chip from NVIDIA, but support is fairly minimal
     for now, and not much information is public about it

  There are five more chips in a separate branch, as those are new chip
  families that I merged along with the necessary infrastructure.

  New board support is not that exciting, with a total of 33 newly added
  machines here:

   - Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
     sg2042

   - Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
     plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
     imx95

   - Two newly added ASPEED BMC based motherboards, and one that got
     removed

   - Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
     msm8976 SoCs

   - Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1

   - A set-top box based on Amlogic meson-gxm

  Updates for existing machines are spread over all the above families.
  One notable change here is support for the RP1 I/O chip used in
  Raspberry Pi 5"

* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
  riscv: dts: sophgo: fix mdio node name for CV180X
  riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
  riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
  riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
  dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
  riscv: dts: sophgo: add ethernet GMAC device for sg2042
  riscv: dts: sophgo: Enable ethernet device for Huashan Pi
  riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
  riscv: dts: sophgo: Add ethernet device for cv18xx
  riscv: dts: sophgo: sg2044: add pmu configuration
  riscv: dts: sophgo: sg2044: add ziccrse extension
  riscv: dts: sophgo: add zfh for sg2042
  riscv: dts: sophgo: add ziccrse for sg2042
  riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
  riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
  riscv: dts: sophgo: sg2044: add MSI device support for SG2044
  riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
  riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
  dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
  riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
  ...

Convert lpc1850-cgu.txt to yaml format.

Additional changes:
- remove extra clock source nodes in example.
- remove clock consumer in example.
- remove clock-output-names and clock-clock-indices from required list to
  match existed dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250606162410.1361169-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232625.3700213-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630232637.3700584-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>