These files were converted to json-schema, but the references weren't
renamed.
Fixes: 66ed144f147a ("dt-bindings: interrupt-controller: Convert ARM GIC to json-schema")
(and other similar commits)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull ARM Device-tree updates from Olof Johansson:
"Besides new bindings and additional descriptions of hardware blocks
for various SoCs and boards, the main new contents here is:
SoCs:
- Intel Agilex (SoCFPGA)
- NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)
New boards:
- Allwinner:
+ RerVision H3-DVK (H3)
+ Oceanic 5205 5inMFD (H6)
+ Beelink GS2 (H6)
+ Orange Pi 3 (H6)
- Rockchip:
+ Orange Pi RK3399
+ Nanopi NEO4
+ Veyron-Mighty Chromebook variant
- Amlogic:
+ SEI Robotics SEI510
- ST Micro:
+ stm32mp157a discovery1
+ stm32mp157c discovery2
- NXP:
+ Eckelmann ci4x10 (i.MX6DL)
+ i.MX8MM EVK (i.MX8MM)
+ ZII i.MX7 RPU2 (i.MX7)
+ ZII SPB4 (VF610)
+ Zii Ultra (i.MX8M)
+ TQ TQMa7S (i.MX7Solo)
+ TQ TQMa7D (i.MX7Dual)
+ Kobo Aura (i.MX50)
+ Menlosystems M53 (i.MX53)j
- Nvidia:
+ Jetson Nano (Tegra T210)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
arm64: dts: bitmain: Add GPIO support for BM1880 SoC
ARM: dts: gemini: Indent DIR-685 partition table
dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
arm64: dts: msm8998: thermal: Fix number of supported sensors
arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
arm64: dts: exynos: Move fixed-clocks out of soc
arm64: dts: exynos: Move pmu and timer nodes out of soc
ARM: dts: s5pv210: Fix camera clock provider on Goni board
ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
ARM: dts: exynos: Move pmu and timer nodes out of soc
arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
arm64: dts: db820c: Add sound card support
arm64: dts: apq8096-db820c: Add HDMI display support
...
- Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support
- Remove clk_readl() and introduce BE versions of basic clk types
* clk-doc:
clk: Drop duplicate clk_register() documentation
clk: Document and simplify clk_core_get_rate_nolock()
clk: Remove 'flags' member of struct clk_fixed_rate
clk: nxp: Drop 'flags' on fixed_rate clk macro
clk: Document __clk_mux_determine_rate()
clk: Document CLK_MUX_READ_ONLY mux flag
clk: Document deprecated things
clk: Collapse gpio clk kerneldoc
* clk-more-critical:
clk: highbank: Convert to CLK_IS_CRITICAL
* clk-meson: (21 commits)
clk: meson: axg-audio: add g12a support
clk: meson: axg-audio: don't register inputs in the onecell data
clk: meson: axg_audio: replace prefix axg by aud
dt-bindings: clk: axg-audio: add g12a support
clk: meson: meson8b: add the video decoder clock trees
clk: meson: meson8b: add the VPU clock trees
clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
clk: meson: meson8b: use a separate clock table for Meson8m2
dt-bindings: clock: meson8b: export the video decoder clocks
clk: meson-g12a: add video decoder clocks
dt-bindings: clock: meson8b: export the VPU clock
clk: meson-g12a: add PCIE PLL clocks
dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL
dt-bindings: clock: meson8b: drop the "ABP" clock definition
clk: meson: g12a: add cpu clocks
dt-bindings: clk: g12a-clkc: add VDEC clock IDs
dt-bindings: clock: axg-audio: unexpose controller inputs
dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID
clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id
...
* clk-basic-be:
clk: core: replace clk_{readl,writel} with {readl,writel}
clk: core: remove powerpc special handling
powerpc/512x: mark clocks as big endian
clk: mux: add explicit big endian support
clk: multiplier: add explicit big endian support
clk: gate: add explicit big endian support
clk: fractional-divider: add explicit big endian support
clk: divider: add explicit big endian support
- Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock
Add DT binding documentation for the Linux driver for the SiFive PRCI clock & reset control IP block, as found on the SiFive FU540 chip. This version includes changes requested by Stephen Boyd <sboyd@kernel.org> and Rob Herring <robh@kernel.org>, and fixes some errors in the initial version. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Megan Wachs <megan@sifive.com> Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add DT bindings document for Milbeaut clock. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add SAM9X60 PMC compatible string. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
STM32F769 clocks are derived from STM32746 clocks. main differences are: - new source clock for SAI1 and SAI2 (HSI or HSE) - Add DFSDM & DSI clocks Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>