* clk-stratix10: clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 * clk-imx: clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: imx: pllv2: avoid using uninitialized values clk: imx6ull: Add epdc_podf instead of sim_podf clk: imx: imx7d: correct video pll clock tree clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock clk: imx: imx6sx: update cko mux options * clk-bcm: clk: bcm2835: De-assert/assert PLL reset signal when appropriate * clk-cs2000: clk: cs2000: set pm_ops in hibernate-compatible way * clk-imx6sll: clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
* clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
* clk-mediatek: clk: mediatek: add audsys support for MT2701 clk: mediatek: add devm_of_platform_populate() for MT7622 audsys dt-bindings: clock: mediatek: add audsys support for MT2701 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device clk: mediatek: update missing clock data for MT7622 audsys clk: mediatek: fix PWM clock source by adding a fixed-factor clock dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 * clk-hisi: clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() clk: hisilicon: mark wdt_mux_p[] as const clk: hisilicon: Mark phase_ops static clk: hi3798cv200: add emmc sample and drive clock clk: hisilicon: add hisi phase clock support clk: hi3798cv200: add COMBPHY0 clock support clk: hi3798cv200: fix define indentation clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK clk: hi3798cv200: correct IR clock parent clk: hi3798cv200: fix unregister call sequence in error path * clk-allwinner: clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU clk: sunxi-ng: add support for the Allwinner H6 CCU dt-bindings: add device tree binding for Allwinner H6 main CCU clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate clk: sunxi-ng: h3: h5: Add minimal rate for video PLL clk: sunxi-ng: Add check for minimal rate to NM PLLs clk: sunxi-ng: Use u64 for calculation of nkmp rate clk: sunxi-ng: Mask nkmp factors when setting register clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name * clk-ux500: clk: ux500: Drop AB8540/9540 support * clk-renesas: (27 commits) clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: fix false-positive Wmaybe-uninitialized warning clk: renesas: r8a77965: Replace DU2 clock clk: renesas: cpg-mssr: Add support for R-Car M3-N clk: renesas: cpg-mssr: add R8A77980 support dt-bindings: clock: add R8A77980 CPG core clock definitions clk: renesas: r8a7792: Add rwdt clock clk: renesas: r8a7794: Add rwdt clock clk: renesas: r8a7791/r8a7793: Add rwdt clock clk: renesas: r8a7790: Add rwdt clock clk: renesas: r8a7745: Add rwdt clock clk: renesas: r8a7743: Add rwdt clock ...
* clk-spreadtrum: clk: sprd: add RTC gate for SC9860 dt-bindings: clocks: add APB RTC gate for SC9860 * clk-stm32f: clk: stm32: Add clk entry for SDMMC2 on stm32F769 clk: stm32: Add DSI clock for STM32F469 Board clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK * clk-stm32mp1: clk: stm32: add configuration flags for each of the stm32 drivers clk: stm32mp1: add Debug clocks clk: stm32mp1: add MCO clocks clk: stm32mp1: add RTC clock clk: stm32mp1: add Peripheral & Kernel Clocks clk: stm32mp1: add Kernel timers clk: stm32mp1: add Sub System clocks clk: stm32mp1: add Post-dividers for PLL clk: stm32mp1: add PLL clocks clk: stm32mp1: add Source Clocks for PLLs clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators clk: stm32mp1: Introduce STM32MP1 clock driver dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings * clk-hi655x: clk: enable hi655x common clk automatically * clk-gpio: clk: clk-gpio: Allow GPIO to sleep in set/get_parent
Add clock binding doc update for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document that Stratix10 clock bindings, and add the clock header file. The clock header is an enumeration of all the different clocks on the Stratix10 platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the driver and devicetree documentation for the Silicon Labs SI544 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 200kHz to 1500MHz. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This adds a new binding for the clocks present in the CFGCHIP syscon registers in TI DA8XX SoCs. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This adds a new binding for the Power Sleep Controller (PSC) for the mach-davinci family of processors. Note: Although TI Keystone has a very similar PSC, we are not using the existing bindings. Keystone is using a legacy one-node-per-clock binding (actually two nodes if you count the separate reset binding for the same IP block). Also, some davinci LPSCs have quirks that aren't handled by the keystone bindings, so we would be adding one compatible string per clock with quirks instead of just a new compatible string for each controller. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This adds a new binding for the PLL IP blocks in the mach-davinci family of processors. Currently, only da850 has device tree support but these bindings can also work for other SoCs in this family just by adding new compatible strings. Note: Although these PLL controllers are very similar to the TI Keystone SoCs, we are not re-using those bindings. The Keystone bindings use a legacy one-node-per-clock binding. Furthermore, the mach-davinici SoCs have a slightly different PLL register layout and a number of quirks that can't be handled by the existing bindings, so the keystone bindings could not be used as-is anyway. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>