linux-stable.git/Documentation/devicetree/bindings/clock, branch v3.7

Merge tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code into next/dt

2012-09-24T04:51:39+00:00

From Tony Prisk:

Update arch-vt8500 and drivers to device tree and
remove existing non-dt code.

* tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code:
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

Resolved add/change conflict in drivers/clk/Makefile.

Signed-off-by: Olof Johansson

arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices

2012-09-21T07:23:58+00:00

Bindings for gpio, interrupt controller, power management controller,
timer, realtime clock, serial uart, ehci and uhci controllers and
framebuffer controllers used on the arch-vt8500 platform.

Framebuffer binding also specifies a 'display' node which is required
for determining the lcd panel data.

Signed-off-by: Tony Prisk

Merge tag 'imx-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

2012-09-13T06:20:33+00:00

It replaces the clk_register_clkdev in imx6q clock driver with DT
lookup.  It depends on Mike's clk-3.7 branch.

* tag 'imx-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: replace clk_register_clkdev with clock DT lookup

Resolved context add/remove conflict in arch/arm/boot/dts/imx6q.dtsi

ARM: imx6q: replace clk_register_clkdev with clock DT lookup

2012-09-11T11:16:14+00:00

It really becomes an maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx6q client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.

Signed-off-by: Shawn Guo

clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup

2012-09-11T06:45:46+00:00

It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx23 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.

Signed-off-by: Shawn Guo

clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup

2012-09-11T06:45:46+00:00

It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx28 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.

Signed-off-by: Shawn Guo

clk: add highbank clock support

2012-07-12T00:58:47+00:00

This adds real clock support to Calxeda Highbank SOC using the common
clock infrastructure.

Signed-off-by: Rob Herring 
[mturquette@linaro.org: fixed up invalid writes to const struct member]
Signed-off-by: Mike Turquette

clk: add DT clock binding support

2012-07-12T00:58:45+00:00

Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant
Likely, this patch adds support to clk_get to allow drivers to retrieve
clock data from the device tree.

Platforms scan for clocks in DT with of_clk_init and a match table, and
the register a provider through of_clk_add_provider. The provider's
clk_src_get function will be called when a device references the
provider's OF node for a clock reference.

v6 (Rob Herring):
    - Return error values instead of NULL to match clock framework
      expectations

v5 (Rob Herring):
    - Move from drivers/of into common clock subsystem
    - Squashed "dt/clock: add a simple provider get function" and
      "dt/clock: add function to get parent clock name"
    - Rebase to 3.4-rc1
    - Drop CONFIG_OF_CLOCK and just use CONFIG_OF
    - Add missing EXPORT_SYMBOL to various functions
    - s/clock-output-name/clock-output-names/
    - Define that fixed-clock binding is a single output

v4 (Rob Herring):
    - Rework for common clk subsystem
    - Add of_clk_get_parent_name function

v3: - Clarified documentation

v2: - fixed errant ';' causing compile error
    - Editorial fixes from Shawn Guo
    - merged in adding lookup to clkdev
    - changed property names to match established convention. After
      working with the binding a bit it really made more sense to follow the
      lead of 'reg', 'gpios' and 'interrupts' by making the input simply
      'clocks' & 'clock-names' instead of 'clock-input-*', and to only use
      clock-output* for the producer nodes. (Sorry Shawn, this will mean
      you need to change some code, but it should be trivial)
    - Add ability to inherit clocks from parent nodes by using an empty
      'clock-ranges' property.  Useful for busses.  I could use some feedback
      on the new property name, 'clock-ranges' doesn't feel right to me.

Signed-off-by: Grant Likely 
Signed-off-by: Rob Herring 
Reviewed-by: Shawn Guo 
Cc: Sascha Hauer 
Signed-off-by: Mike Turquette