linux-stable.git/Documentation/devicetree/bindings/arm, branch linux-6.2.y

dt-bindings: drop redundant part of title (end, part three)

2022-12-16T17:41:49+00:00

The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.

Drop trailing "bindings" in various forms (also with trailing full
stop):

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -not -name 'trivial-devices.yaml' \
    -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Alexandre Belloni 
Acked-by: Matti Vaittinen  # ROHM
Acked-by: Ulf Hansson  # MMC
Acked-by: Stephen Boyd  # clk
Acked-by: Dmitry Torokhov  # input
Acked-by: Mark Brown 
Acked-by: Hans Verkuil  # media
Acked-by: Sebastian Reichel  # power
Acked-by: Viresh Kumar  # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring

dt-bindings: drop redundant part of title (end)

2022-12-16T17:41:49+00:00

The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.

Drop trailing "Devicetree bindings" in various forms (also with
trailing full stop):

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -not -name 'trivial-devices.yaml' \
    -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \;

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -not -name 'trivial-devices.yaml' \
    -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \;

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -not -name 'trivial-devices.yaml' \
    -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \;

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Alexandre Belloni 
Acked-by: Jonathan Cameron  # IIO
Reviewed-by: Jonathan Cameron 
Acked-by: Ulf Hansson  # MMC
Acked-by: Stephen Boyd  # clk
Acked-by: Dmitry Torokhov  # input
Acked-by: Mark Brown 
Acked-by: Hans Verkuil  # media
Acked-by: Sebastian Reichel  # power
Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-12-13T23:47:48+00:00

Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...

Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-12-13T21:13:55+00:00

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Various LED binding conversions and clean-ups. Convert the
     ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
     Consistently reference LED common.yaml or multi-led schemas and
     disallow undefined properties.

   - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
     and fsl,imx-fb bindings to schema

   - Add ata-generic, Broadcom u-boot environment, and dynamic MTD
     sub-partitions bindings.

   - Make all SPI based displays reference spi-peripheral-props.yaml

   - Fix some schema property regex's which should be fixed strings or
     were missing start/end anchors

   - Remove 'status' in examples, again...

  DT Core:

   - Fix a possible NULL dereference in overlay functions

   - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
     never worked)

   - Add of_address_count() helper to count number of 'reg' entries

   - Support .dtso extension for DT overlay source files. Rename staging
     and unittest overlay files.

   - Update dtc to upstream v1.6.1-63-g55778a03df61"

* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
  dt-bindings: leds: Add missing references to common LED schema
  dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
  of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
  dt-bindings: lcdif: Fix constraints for imx8mp
  media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
  dt-bindings: Drop Jee Heng Sia
  dt-bindings: thermal: cooling-devices: Add missing cache related properties
  dt-bindings: leds: irled: ir-spi-led: convert to DT schema
  dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
  dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
  dt-bindings: leds: mt6360: rework to match multi-led
  dt-bindings: leds: lp55xx: rework to match multi-led
  dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
  dt-bindings: leds: lp55xx: allow label
  dt-bindings: leds: use unevaluatedProperties for common.yaml
  dt-bindings: thermal: tsens: Add SM6115 compatible
  of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
  dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
  dt-bindings: Add missing start and/or end of line regex anchors
  dt-bindings: qcom,pdc: Add missing compatibles
  ...

Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-12-13T21:03:06+00:00

Pull pin control updates from Linus Walleij:
 "The two large chunks is the header clean-up from Andy and the Qualcomm
  DT bindings clean-up from Krzysztof. Each which could give rise to
  conflicts, but I haven't seen any.

  The YAML conversions happening around the device tree is the biggest
  item in the series and is the result of Rob Herrings ambition to
  autovalidate these trees against strict schemas and it is paying off
  in lots of bugs found and ever prettier device trees. Sooner or later
  the transition will be complete, Krzysztof is fixing up all of the
  Qualcomm stuff, which is pretty voluminous.

  Core changes:

   - minor but nice and important documentation clean-ups

  New drivers:

   - subdriver for the Qualcomm SDM670 SoC

   - subdriver for the Intel Moorefield SoC

   - trivial support for the NXP Freescale i.MXRT1170 SoC

  Other changes and improvements

   - major clean-up of the Qualcomm pin control device tree bindings by
     Krzysztof

   - major header clean-up by Andy

   - some immutable irqchip clean-up for the Actions Semiconductor and
     Nuvoton drivers

   - GPIO helpers for The Cypress cy8c95x0 driver

   - bias handling in the Mediatek MT7986 driver

   - remove the unused pins-are-numbered concept that never flew"

* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
  pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
  dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
  dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
  pinctrl: stm32: Remove check for pins-are-numbered
  pinctrl: mediatek: common: Remove check for pins-are-numbered
  pinctrl: qcom: remove duplicate included header files
  pinctrl: sunxi: d1: Add CAN bus pinmuxes
  pinctrl: loongson2: Fix some const correctness
  pinctrl: pinconf-generic: add missing of_node_put()
  pinctrl: intel: Enumerate PWM device when community has a capability
  pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
  pwm: lpss: Allow other drivers to enable PWM LPSS
  pwm: lpss: Include headers we are the direct user of
  pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
  pwm: Add a stub for devm_pwmchip_add()
  pinctrl: k210: call of_node_put()
  pinctrl: starfive: Use existing variable gpio
  dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
  pinconf-generic: fix style issues in pin_config_param doc
  pinctrl: pinctrl-loongson2: fix Kconfig dependency
  ...

Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-12-12T18:21:03+00:00

Pull ARM SoC DT updates from Arnd Bergmann:
 "The devicetree changes contain exactly 1000 non-merge changesets,
  including a number of new arm64 SoC variants from Qualcomm and Apple,
  as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
  variants.

  While we have occasionally merged support for non-arm SoCs in the
  past, this is now the normal path for riscv devicetree files.

  The most notable changes, by SoC platform, are:

   - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
     now have initial support. This is particularly nice as I am typing
     this on a T6002 Mac Studio with only a small number of driver
     patches.

   - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
     SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
     (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
     650) are all mobile phone chips that are closely related to others
     we already support.

     Adding those helps support more phones and we add several models
     from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
     3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
     Google (Pixel 3a).

     There are also new variants of the Herobrine and Trogdor chromebook
     motherboards. SA8540P is an automotive SoC used in the Qdrive-3
     development platform

   - Rockchips gains no new SoC variants, but a lot of new boards: three
     mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
     more Anbernic gaming systems based on RK3566 and a number of other
     RK356x based single-board computers.

   - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
     the newly added RZ/Five is based on the same design, this now gets
     reorganized in order to share most of the dts description between
     the two and add the RZ/Five SMARC EVK board support.

  Aside from that, there are the usual changes all over the tree:

   - New boards on other platforms contain two ASpeed BMC users, two
     Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
     Kobo Aura2 ebook reader, two i.MX8 based development boards, two
     Uniphier Pro5 development boards, the STM32MP1 testbench board from
     DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
     Helio X10 based Sony Xperia M5 phone.

   - The Starfive JH7100 source gets reorganized in order to support the
     VisionFive V1 board.

   - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
     ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
     Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
     spear, ... The treewide cleanups now have a lot of fixes for cache
     nodes and other binding violoations.

   - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
     Renesas platforms, adding a lot more on-chip device support

   - A rework of the way that DTB overlays are built"

* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
  arm64: dts: apple: t6002: Fix GPU power domains
  arm64: dts: apple: t600x-pmgr: Fix search & replace typo
  arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
  arm64: dts: apple: Rename dart-sio* to sio-dart*
  arch: arm64: apple: t600x: Use standard "iommu" node name
  arch: arm64: apple: t8103: Use standard "iommu" node name
  ARM: dts: socfpga: Fix pca9548 i2c-mux node name
  dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
  dt-bindings: iio: adc: qcom,spmi-vadc: extend example
  arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
  arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
  arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
  arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
  arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
  arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
  arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
  arm64: dts: qcom: sm8450: align MMC node names with dtschema
  arm64: dts: qcom: sc7180-trogdor: use generic node names
  arm64: dts: qcom: sm8450-hdk: add sound support
  arm64: dts: qcom: sm8450: add Soundwire and LPASS
  ...

Merge tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

2022-12-07T21:07:48+00:00

More Qualcomm driver updates for 6.2

Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.

Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.

Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.

BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.

* tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
  soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
  dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
  soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
  soc: qcom: Select REMAP_MMIO for LLCC driver
  soc: qcom: rpmpd: Add SM4250 support
  dt-bindings: power: rpmpd: Add SM4250 support
  dt-bindings: soc: qcom: aoss: Add compatible for SM8550
  soc: qcom: llcc: Add configuration data for SM8550
  dt-bindings: arm: msm: Add LLCC compatible for SM8550
  soc: qcom: llcc: Add v4.1 HW version support
  soc: qcom: socinfo: Add SM8550 ID
  soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
  soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
  soc: qcom: rpmhpd: Add SM8550 power domains
  dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
  soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976

Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann

Merge tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

2022-12-07T21:06:03+00:00

More Qualcomm DTS updates for 6.2

This introduces support for the OnePlus One, on MSM8974Pro, and properly
marks other Pro devices as compatible thereof. Also on MSM8974, the
description of USB devices and their PHYs are cleaned up.

On the binding side compatibles for recently added ARM and ARM64 boards
are added.

* tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits)
  dt-bindings: arm: qcom: Add zombie
  ARM: dts: qcom: msm8974: Add OnePlus One
  dt-bindings: arm: qcom: Document oneplus,bacon device
  ARM: dts: qcom: msm8974: clean up USB nodes
  arm: dts: qcom: use qcom,msm8974pro for pro devices
  dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974
  ARM: dts: qcom: align LED node names with dtschema
  dt-bindings: arm: qcom: Document additional sa8540p device
  dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)
  dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices
  dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip
  dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
  dt-bindings: arm: cpus: add qcom kryo 360 compatible
  ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
  ARM: dts: qcom-msm8960: use define for interrupt constants
  dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV
  ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8226: Add MMCC node
  dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker
  dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
  ...

Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann

dt-bindings: Move fixed string node names under 'properties'

2022-12-06T20:50:35+00:00

Fixed string node names should be under 'properties' rather than
'patternProperties'. Additionally, without beginning and end of line
anchors, any prefix or suffix is allowed on the specified node name.
These cases don't appear to want a prefix or suffix, so move them under
'properties'.

In some cases, the diff turns out to look like we're moving some
patterns rather than the fixed string properties.

Reviewed-by: Krzysztof Kozlowski 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20221118223708.1721134-1-robh@kernel.org
Signed-off-by: Rob Herring

dt-bindings: arm: qcom: Add zombie

2022-12-05T23:02:10+00:00

Add entries in the device tree binding for sc7280-zombie.

Reviewed-by: Krzysztof Kozlowski 
Reviewed-by: Douglas Anderson 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Owen Yang 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221205133603.v15.1.Idfcba5344b7995b44b7fa2e20f1aa4351defeca6@changeid