Pull char / misc driver updates from Greg KH:
 "Here's the big char and misc driver update for 4.7-rc1.

  Lots of different tiny driver subsystems have updates here with new
  drivers and functionality.  Details in the shortlog.

  All have been in linux-next with no reported issues for a while"

* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
  mcb: Delete num_cells variable which is not required
  mcb: Fixed bar number assignment for the gdd
  mcb: Replace ioremap and request_region with the devm version
  mcb: Implement bus->dev.release callback
  mcb: export bus information via sysfs
  mcb: Correctly initialize the bus's device
  mei: bus: call mei_cl_read_start under device lock
  coresight: etb10: adjust read pointer only when needed
  coresight: configuring ETF in FIFO mode when acting as link
  coresight: tmc: implementing TMC-ETF AUX space API
  coresight: moving struct cs_buffers to header file
  coresight: tmc: keep track of memory width
  coresight: tmc: make sysFS and Perf mode mutually exclusive
  coresight: tmc: dump system memory content only when needed
  coresight: tmc: adding mode of operation for link/sinks
  coresight: tmc: getting rid of multiple read access
  coresight: tmc: allocating memory when needed
  coresight: tmc: making prepare/unprepare functions generic
  coresight: tmc: splitting driver in ETB/ETF and ETR components
  coresight: tmc: cleaning up header file
  ...

Pull clk updates from Stephen Boyd:
 "It's the usual big pile of driver updates and additions, but we do
  have a couple core changes in here as well.

  Core:

   - CLK_IS_CRITICAL support has been added.  This should allow drivers
     to properly express that a certain clk should stay on even if their
     prepare/enable count drops to 0 (and in turn the parents of these
     clks should stay enabled).

   - A clk registration API has been added, clk_hw_register(), and an OF
     clk provider API has been added, of_clk_add_hw_provider().  These
     APIs have been put in place to further split clk providers from clk
     consumers, with the goal being to have clk providers never deal
     with struct clk pointers at all.  Conversion of provider drivers is
     on going.  clkdev has also gained support for registering clk_hw
     pointers directly so we can convert drivers that don't use
     devicetree.

  New Drivers:

   - Marvell ap806 and cp110 system controllers (with clks inside!)
   - Hisilicon Hi3519 clock and reset controller
   - Axis ARTPEC-6 clock controllers
   - Oxford Semiconductor OXNAS clock controllers
   - AXS10X I2S PLL
   - Rockchip RK3399 clock and reset controller

  Updates:

   - MMC2 and UART2 clks on Samsung Exynos 3250, ACLK on Samsung Exynos
     542x SoCs, and some more clk ID exporting for bus frequency scaling
   - Proper BCM2835 PCM clk support and various other clks
   - i.MX clk updates for i.MX6SX, i.MX7, and VF610
   - Renesas updates for R-Car H3
   - Tegra210 got updates for DisplayPort and HDMI 2.0
   - Rockchip driver refactorings and fixes due to adding RK3399 support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (139 commits)
  clk: fix critical clock locking
  clk: qcom: mmcc-8996: Remove clocks that should be controlled by RPM
  clk: ingenic: Allow divider value to be divided
  clk: sunxi: Add display and TCON0 clocks driver
  clk: rockchip: drop old_rate calculation on pll rate changes
  clk: rockchip: simplify GRF handling in pll clocks
  clk: rockchip: lookup General Register Files in rockchip_clk_init
  clk: rockchip: fix the rk3399 sdmmc sample / drv name
  clk: mvebu: new driver for Armada CP110 system controller
  dt-bindings: arm: add DT binding for Marvell CP110 system controller
  clk: mvebu: new driver for Armada AP806 system controller
  clk: hisilicon: add CRG driver for hi3519 soc
  clk: hisilicon: export some hisilicon APIs to modules
  reset: hisilicon: add reset controller driver for hisilicon SOCs
  clk: bcm/kona: Do not use sizeof on pointer type
  clk: qcom: msm8916: Fix crypto clock flags
  clk: nxp: lpc18xx: Initialize clk_init_data::flags to 0
  clk/axs10x: Add I2S PLL clock driver
  clk: imx7d: fix ahb clock mux 1
  clk: fix comment of devm_clk_hw_register()
  ...

Pull devicetree updates from Rob Herring:

 - Rewrite of the unflattening code to avoid recursion and lessen the
   stack usage.

 - Rewrite of the phandle args parsing code to get rid of the fixed args
   size.  This is needed for IOMMU code.

 - Sync to latest dtc which adds more dts style checking.  These
   warnings are enabled with "W=1" compiles.

 - Tegra documentation updates related to the above warnings.

 - A bunch of spelling and other doc fixes.

 - Various vendor prefix additions.

* tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits)
  devicetree: Add Creative Technology vendor id
  gpio: dt-bindings: add ibm,ppc4xx-gpio binding
  of/unittest: Remove unnecessary module.h header inclusion
  drivers/of: Fix build warning in populate_node()
  drivers/of: Fix depth when unflattening devicetree
  of: dynamic: changeset prop-update revert fix
  drivers/of: Export of_detach_node()
  drivers/of: Return allocated memory from of_fdt_unflatten_tree()
  drivers/of: Specify parent node in of_fdt_unflatten_tree()
  drivers/of: Rename unflatten_dt_node()
  drivers/of: Avoid recursively calling unflatten_dt_node()
  drivers/of: Split unflatten_dt_node()
  of: include errno.h in of_graph.h
  of: document refcount incrementation of of_get_cpu_node()
  Documentation: dt: soc: fix spelling mistakes
  Documentation: dt: power: fix spelling mistake
  Documentation: dt: pinctrl: fix spelling mistake
  Documentation: dt: opp: fix spelling mistake
  Documentation: dt: net: fix spelling mistakes
  Documentation: dt: mtd: fix spelling mistake
  ...

Pull power supply and reset updates from Sebastian Reichel:

 - alternative reset driver for new at91 SoCs

 - misc fixes

* tag 'for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  sbs-battery: fix power status when battery charging near dry
  power: ipaq-micro-battery: freeing the wrong variable
  power/max8925: freeing wrong variable
  power: reset: at91-shdwc: add new shutdown controller driver
  ARM: dts: at91: shdwc binding: add new shutdown controller documentation

Pull ARM updates from Russell King:
 "Changes included in this pull request:

   - revert pxa2xx-flash back to using ioremap_cached() and switch
     memremap() to use arch_memremap_wb()

   - remove pci=firmware command line argument handling

   - remove unnecessary arm_dma_set_mask() implementation, the generic
     implementation will do for ARM

   - removal of the ARM kallsyms "hack" to work around mode switching
     veneers and vectors located below PAGE_OFFSET

   - tidy up build system output a little

   - add L2 cache power management DT bindings

   - remove duplicated local_irq_disable() in reboot paths

   - handle AMBA primecell devices better at registration time with PM
     domains (needed for Samsung SoCs)

   - ARM specific preparation to support Keystone II kexec"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs
  ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings
  ARM: 8569/1: pl2x0: Add OF control of cache power management
  ARM: 8568/1: reboot: remove duplicated local_irq_disable()
  ARM: 8566/1: drivers: amba: properly handle devices with power domains
  ARM: provide arm_has_idmap_alias() helper
  ARM: kexec: remove 512MB restriction on kexec crashdump
  ARM: provide improved virt_to_idmap() functionality
  ARM: kexec: fix crashkernel= handling
  ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets
  ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."
  ARM: 8553/1: kallsyms: remove --page-offset command line option
  ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM
  ARM: 8555/1: kallsyms: ignore ARM mode switching veneers
  ARM: 8548/1: dma-mapping: remove arm_dma_set_mask()
  ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling
  ARM: memremap: implement arch_memremap_wb()
  memremap: add arch specific hook for MEMREMAP_WB mappings
  mtd: pxa2xx-flash: switch back from memremap to ioremap_cached
  ARM: reintroduce ioremap_cached() for creating cached I/O mappings

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons.

  For the most part, this is now related to power management
  controllers, which have not yet been abstracted into a separate
  subsystem, and typically require some code in drivers/soc or arch/arm
  to control the power domains.

  Another large chunk here is a rework of the NVIDIA Tegra USB3.0
  support, which was surprisingly tricky and took a long time to get
  done.

  Finally, reset controller handling as always gets merged through here
  as well"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  arm-ccn: Enable building as module
  soc/tegra: pmc: Add generic PM domain support
  usb: xhci: tegra: Add Tegra210 support
  usb: xhci: Add NVIDIA Tegra XUSB controller driver
  dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
  dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
  PCI: tegra: Support per-lane PHYs
  dt-bindings: pci: tegra: Update for per-lane PHYs
  phy: tegra: Add Tegra210 support
  phy: Add Tegra XUSB pad controller support
  dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
  dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
  phy: core: Allow children node to be overridden
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
  drivers: firmware: psci: make two helper functions inline
  soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
  soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
  soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
  ...

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "We continue ramping up platform support for 64-bit ARM machines, with
  111 individual non-merge changesets touching 21 platforms.

  The LG1312 platform is completely new and is the first ARM platform by
  LG that we support in the mainline kernel.  Two other SoCs got added
  that are updated versions of existing SoC families, so the port mainly
  consists of new dts files:

   - The Hisilicon Hip06/D03 is the latest server platform from
     Huawei/Hisilicon, and follows the Hip05/D02 platform.

   - Rockchip RK3399 follows the 32-bit RK3288 that is popular in
     low-end Chromebooks and the 64-bit RK3368 that is mainly found in
     chinese Android TV boxes.

  The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a
  long-awaited overhaul with a lot of devices enabled in the DT, so it
  should be much more usable with a mainline kernel now.  See also

     https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd

  A lot of work went into enabling new device drivers on existing
  machines, but we also have a couple of new commercially available
  machines:

   - Google Pixel C laptop based on Tegra210
   - Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
   - Geekbuying GeekBox based on Rockchip RK3368

  And finally, a couple of reference or development platforms that are
  not end-user platforms but are used for trying out the respective SoC
  platforms:

   - Amlogic Meson GXBB P200 and P201 development systems
   - NXP Layerscape 1043A QDS development board
   - Hisilicon Hip06 D03 server board, as mentioned above
   - LG1312 Reference Design
   - RK3399 Evaluation Board"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  arm64: dts: marvell: add XOR node for Armada 3700 SoC
  dt-bindings: document rockchip rk3399-evb board
  arm64: dts: rockchip: add dts file for RK3399 evaluation board
  arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
  dt-bindings: rockchip-dw-mshc: add description for rk3399
  arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
  arm64: dts: marvell: Rename armada-37xx USB node
  arm64: dts: marvell: Clean up armada-3720-db
  Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
  arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
  arm64: dts: hip05: Add nor flash support
  arm64: dts: hip05: fix its node without msi-cells
  arm64: dts: r8a7795: Don't disable referenced optional clocks
  arm64: dts: salvator-x: populate EXTALR
  arm64: dts: r8a7795: enable PCIe on Salvator-X
  arm64: dts: r8a7795: Add PCIe nodes
  arm64: tegra: Add IOMMU node to GM20B on Tegra210
  arm64: tegra: Add reference clock to GM20B on Tegra210
  dt-bindings: Add documentation for GM20B GPU
  dt-bindings: gk20a: Document iommus property
  ...

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
  changesets, 450 files changed, 23340 insertions, 5216 deletions.

  The three platforms that are added with the "soc" branch are here as
  well, and we add some related machine files:

   - For Aspeed AST2400/AST2500, we get the evaluation platform and the
     Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
   - For Oxnas 810SE, the Western Digital "My Book World Edition" is
     added as the only platform at the moment.
   - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
     supported

  On the ARM Realview development platform, we now support all machines
  with device tree, previously only the board files were supported,
  which in turn will likely be removed soon.

  Qualcomm IPQ4019 is the second generation ARM based "Internet
  Processor", following the IPQ806x that is used in many high-end WiFi
  routers.  This one integrates two ath10k wifi radios that were
  previously on separate chips.

  Other boards that got added for existing chips are:

  Ti OMAP family:
     - Amazon Kindle Fire, first generation, tablet and ebook reader
     - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
     - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
       development systems

  Samsung EXYNOS platform:
     - Samsung ARTIK5 evaluation board, see

        https://www.artik.io/modules/overview/artik-5/

  NXP i.MX platforms:
     - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
       TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
       SoM modules
     - Embest MarS Board i.MX6Dual DIY platform
     - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
       Nitrogen6sx embedded boards
     - Technexion Pico i.MX6UL compute module
     - ZII VF610 Development Board

  Marvell embedded (mvebu, orion, kirkwood) platforms:
     - Linksys Viper (E4200v2 / EA4500) WiFi router
     - Buffalo Kurobox Pro NAS

  Qualcomm Snapdragon:
     - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600

  Rockchips platform:
     - mqmaker MiQi single-board computer

  Altera SoCFPGA:
     - samtec VIN|ING 1000 vehicle communication interface

  Allwinner Sunxi platforms:
     - Dserve DSRV9703C tablet
     - Difrnce DIT4350 tablet
     - Colorfly E708 Q1 tablet
     - Polaroid MID2809PXE04 tablet
     - Olimex A20 OLinuXino LIME2 single board computer
     - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
       computers

  Across many platforms, bug fixes went in to address warnings that dtc
  now emits with 'make dtbs W=1'.  Further changes for device enablement
  went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
  Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
  NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
  rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
  Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
  Versatile Express"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
  ARM: dts: tango4: Import watchdog node
  ARM: dts: tango4: Update cpus node for cpufreq
  ARM: dts: tango4: Update DT to match clk driver
  ARM: dts: tango4: Initial thermal support
  arm/dst: Add Aspeed ast2500 device tree
  arm/dts: Add Aspeed ast2400 device tree
  ARM: sun7i: dt: Add pll3 and pll7 clocks
  ARM: dts: sunxi: Add a olinuxino-lime2-emmc
  ARM: dts: at91: sama5d4: add trng node
  ARM: dts: at91: sama5d3: add trng node
  ARM: dts: at91: sama5d2: add trng node
  ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
  ARM: sun4i: dt: Add pll3 and pll7 clocks
  ARM: sun5i: chip: Enable the TV Encoder
  ARM: sun5i: r8: Add display blocks to the DTSI
  ARM: sun5i: a13: Add display and TCON clocks
  ARM: dts: ux500: configure the accelerometers open drain
  ARM: mx5: dts: Enable USB OTG on M53EVK
  ARM: dts: imx6ul-14x14-evk: Add audio support
  ARM: dts: imx6qdl: Remove unneeded unit-addresses
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...

Pull EDAC updates from Borislav Petkov:
 "It was pretty busy in EDAC land this time:

   - Altera Arria10 L2 cache and On-Chip RAM ECC handling (Thor Thayer)

   - Remove ad-hoc buffering of MCE records in sb_edac and i7core_edac
     (Tony Luck)

   - Do not register sb_edac with pci_register_driver() (Tony Luck)

   - Add support for Skylake to ie31200_edac (Jason Baron)

   - Do not register amd64_edac with pci_register_driver() (Borislav
     Petkov)

  ... plus the usual round of cleanups and fixes all over the place"

* tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
  EDAC, amd64_edac: Drop pci_register_driver() use
  EDAC, ie31200_edac: Add Skylake support
  EDAC, sb_edac: Use cpu family/model in driver detection
  EDAC, i7core: Remove double buffering of error records
  EDAC, amd64_edac: Issue driver banner only on success
  ARM: socfpga: Initialize Arria10 OCRAM ECC on startup
  EDAC: Increment correct counter in edac_inc_ue_error()
  EDAC, sb_edac: Remove double buffering of error records
  EDAC: Fix used after kfree() error in edac_unregister_sysfs()
  EDAC, altera: Avoid unused function warnings
  EDAC, altera: Remove useless casts
  ARM: socfpga: Enable Arria10 OCRAM ECC on startup
  EDAC, altera: Add Arria10 OCRAM ECC support
  Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding
  EDAC, altera: Make OCRAM ECC dependency check generic
  EDAC, altera: Add register offset for ECC Enable
  EDAC, altera: Extract error inject operations to a struct fops
  ARM: socfpga: Enable Arria10 L2 cache ECC on startup
  EDAC, altera: Add Arria10 L2 Cache ECC handling
  Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding
  ...