linux-stable.git/Documentation/admin-guide, branch v5.4.97 Linux kernel stable tree dm integrity: conditionally disable "recalculate" feature 2021-01-30T12:54:10+00:00 Mikulas Patocka mpatocka@redhat.com 2021-01-20T18:59:11+00:00 2d8848edc96b43d1dd8823a533e702953048b33e commit 5c02406428d5219c367c5f53457698c58bc5f917 upstream. Otherwise a malicious user could (ab)use the "recalculate" feature that makes dm-integrity calculate the checksums in the background while the device is already usable. When the system restarts before all checksums have been calculated, the calculation continues where it was interrupted even if the recalculate feature is not requested the next time the dm device is set up. Disable recalculating if we use internal_hash or journal_hash with a key (e.g. HMAC) and we don't have the "legacy_recalculate" flag. This may break activation of a volume, created by an older kernel, that is not yet fully recalculated -- if this happens, the user should add the "legacy_recalculate" flag to constructor parameters. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5c02406428d5219c367c5f53457698c58bc5f917 upstream.

Otherwise a malicious user could (ab)use the "recalculate" feature
that makes dm-integrity calculate the checksums in the background
while the device is already usable. When the system restarts before all
checksums have been calculated, the calculation continues where it was
interrupted even if the recalculate feature is not requested the next
time the dm device is set up.

Disable recalculating if we use internal_hash or journal_hash with a
key (e.g. HMAC) and we don't have the "legacy_recalculate" flag.

This may break activation of a volume, created by an older kernel,
that is not yet fully recalculated -- if this happens, the user should
add the "legacy_recalculate" flag to constructor parameters.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery 2021-01-27T10:47:45+00:00 David Woodhouse dwmw@amazon.co.uk 2021-01-06T15:39:56+00:00 5fa6987258a757a9fae70ff28188dff07f01bf50 [ Upstream commit b36b0fe96af13460278bf9b173beced1bd15f85d ] It's useful to be able to test non-vector event channel delivery, to make sure Linux will work properly on older Xen which doesn't have it. It's also useful for those working on Xen and Xen-compatible hypervisors, because there are guest kernels still in active use which use PCI INTX even when vector delivery is available. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210106153958.584169-4-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b36b0fe96af13460278bf9b173beced1bd15f85d ]

It's useful to be able to test non-vector event channel delivery, to make
sure Linux will work properly on older Xen which doesn't have it.

It's also useful for those working on Xen and Xen-compatible hypervisors,
because there are guest kernels still in active use which use PCI INTX
even when vector delivery is available.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-4-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
USB: UAS: introduce a quirk to set no_write_same 2020-12-21T12:27:06+00:00 Oliver Neukum oneukum@suse.com 2020-12-09T15:26:39+00:00 4ad8fc6cce018467c50ae18a70636c062d0d6e81 commit 8010622c86ca5bb44bc98492f5968726fc7c7a21 upstream. UAS does not share the pessimistic assumption storage is making that devices cannot deal with WRITE_SAME. A few devices supported by UAS, are reported to not deal well with WRITE_SAME. Those need a quirk. Add it to the device that needs it. Reported-by: David C. Partridge <david.partridge@perdrix.co.uk> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8010622c86ca5bb44bc98492f5968726fc7c7a21 upstream.

UAS does not share the pessimistic assumption storage is making that
devices cannot deal with WRITE_SAME.  A few devices supported by UAS,
are reported to not deal well with WRITE_SAME. Those need a quirk.

Add it to the device that needs it.

Reported-by: David C. Partridge <david.partridge@perdrix.co.uk>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/64s: flush L1D after user accesses 2020-11-22T09:14:10+00:00 Nicholas Piggin npiggin@gmail.com 2020-11-19T23:35:14+00:00 09495b5f7aab84cf41ef54259cfea4da86a7df98 commit 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de upstream. IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de upstream.

IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.

However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.

This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.

This is part of the fix for CVE-2020-4788.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/64s: flush L1D on kernel entry 2020-11-22T09:14:10+00:00 Nicholas Piggin npiggin@gmail.com 2020-11-19T23:35:13+00:00 b65458b6be8032c5179d4f562038575d7b3a6be3 commit f79643787e0a0762d2409b7b8334e83f22d85695 upstream. [backporting note: we need to mark some exception handlers as out-of-line because the flushing makes them take too much space -- dja] IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f79643787e0a0762d2409b7b8334e83f22d85695 upstream.

[backporting note: we need to mark some exception handlers as out-of-line
 because the flushing makes them take too much space -- dja]

IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.

However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.

This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.

This is part of the fix for CVE-2020-4788.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/events: defer eoi in case of excessive number of events 2020-11-05T10:43:12+00:00 Juergen Gross jgross@suse.com 2020-09-07T13:47:30+00:00 1d628c330fa6e1fe58b00624d46b4ce0a2502f54 commit e99502f76271d6bc4e374fe368c50c67a1fd3070 upstream. In case rogue guests are sending events at high frequency it might happen that xen_evtchn_do_upcall() won't stop processing events in dom0. As this is done in irq handling a crash might be the result. In order to avoid that, delay further inter-domain events after some time in xen_evtchn_do_upcall() by forcing eoi processing into a worker on the same cpu, thus inhibiting new events coming in. The time after which eoi processing is to be delayed is configurable via a new module parameter "event_loop_timeout" which specifies the maximum event loop time in jiffies (default: 2, the value was chosen after some tests showing that a value of 2 was the lowest with an only slight drop of dom0 network throughput while multiple guests performed an event storm). How long eoi processing will be delayed can be specified via another parameter "event_eoi_delay" (again in jiffies, default 10, again the value was chosen after testing with different delay values). This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e99502f76271d6bc4e374fe368c50c67a1fd3070 upstream.

In case rogue guests are sending events at high frequency it might
happen that xen_evtchn_do_upcall() won't stop processing events in
dom0. As this is done in irq handling a crash might be the result.

In order to avoid that, delay further inter-domain events after some
time in xen_evtchn_do_upcall() by forcing eoi processing into a
worker on the same cpu, thus inhibiting new events coming in.

The time after which eoi processing is to be delayed is configurable
via a new module parameter "event_loop_timeout" which specifies the
maximum event loop time in jiffies (default: 2, the value was chosen
after some tests showing that a value of 2 was the lowest with an
only slight drop of dom0 network throughput while multiple guests
performed an event storm).

How long eoi processing will be delayed can be specified via another
parameter "event_eoi_delay" (again in jiffies, default 10, again the
value was chosen after testing with different delay values).

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/fpu: Allow multiple bits in clearcpuid= parameter 2020-10-29T08:57:29+00:00 Arvind Sankar nivedita@alum.mit.edu 2020-09-07T21:39:19+00:00 7e297c83e64df6981509943ebc603c487abdea8b [ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ] Commit 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument") changed clearcpuid parsing from __setup() to cmdline_find_option(). While the __setup() function would have been called for each clearcpuid= parameter on the command line, cmdline_find_option() will only return the last one, so the change effectively made it impossible to disable more than one bit. Allow a comma-separated list of bit numbers as the argument for clearcpuid to allow multiple bits to be disabled again. Log the bits being disabled for informational purposes. Also fix the check on the return value of cmdline_find_option(). It returns -1 when the option is not found, so testing as a boolean is incorrect. Fixes: 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ]

Commit

  0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")

changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.

Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.

Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.

Fixes: 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
block/diskstats: more accurate approximation of io_ticks for slow disks 2020-10-07T06:01:29+00:00 Konstantin Khlebnikov khlebnikov@yandex-team.ru 2020-03-25T13:07:04+00:00 2334b2d5a2bd1a4e9877623ef532b114d83bdf94 commit 2b8bd423614c595540eaadcfbc702afe8e155e50 upstream. Currently io_ticks is approximated by adding one at each start and end of requests if jiffies counter has changed. This works perfectly for requests shorter than a jiffy or if one of requests starts/ends at each jiffy. If disk executes just one request at a time and they are longer than two jiffies then only first and last jiffies will be accounted. Fix is simple: at the end of request add up into io_ticks jiffies passed since last update rather than just one jiffy. Example: common HDD executes random read 4k requests around 12ms. fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 & iostat -x 10 sdb Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch: Before: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43 After: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99 Now io_ticks does not loose time between start and end of requests, but for queue-depth > 1 some I/O time between adjacent starts might be lost. For load estimation "%util" is not as useful as average queue length, but it clearly shows how often disk queue is completely empty. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> From: "Banerjee, Debabrata" <dbanerje@akamai.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2b8bd423614c595540eaadcfbc702afe8e155e50 upstream.

Currently io_ticks is approximated by adding one at each start and end of
requests if jiffies counter has changed. This works perfectly for requests
shorter than a jiffy or if one of requests starts/ends at each jiffy.

If disk executes just one request at a time and they are longer than two
jiffies then only first and last jiffies will be accounted.

Fix is simple: at the end of request add up into io_ticks jiffies passed
since last update rather than just one jiffy.

Example: common HDD executes random read 4k requests around 12ms.

fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 &
iostat -x 10 sdb

Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch:

Before:

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
sdb               0,00     0,00   82,60    0,00   330,40     0,00     8,00     0,96   12,09   12,09    0,00   1,02   8,43

After:

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
sdb               0,00     0,00   82,50    0,00   330,00     0,00     8,00     1,00   12,10   12,10    0,00  12,12  99,99

Now io_ticks does not loose time between start and end of requests, but
for queue-depth > 1 some I/O time between adjacent starts might be lost.

For load estimation "%util" is not as useful as average queue length,
but it clearly shows how often disk queue is completely empty.

Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
From: "Banerjee, Debabrata" <dbanerje@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/speculation: Add Ivy Bridge to affected list 2020-06-10T18:24:58+00:00 Josh Poimboeuf jpoimboe@redhat.com 2020-04-27T18:46:13+00:00 590459086bc9f0dd96bc99281939ffd0db85d9aa commit 3798cc4d106e91382bfe016caa2edada27c2bb3f upstream Make the docs match the code. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3798cc4d106e91382bfe016caa2edada27c2bb3f upstream

Make the docs match the code.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/speculation: Add SRBDS vulnerability and mitigation documentation 2020-06-10T18:24:57+00:00 Mark Gross mgross@linux.intel.com 2020-04-16T16:21:51+00:00 faf187abda946bcb7edc097213e46cb3983e0f9f commit 7222a1b5b87417f22265c92deea76a6aecd0fb0f upstream Add documentation for the SRBDS vulnerability and its mitigation. [ bp: Massage. jpoimboe: sysfs table strings. ] Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7222a1b5b87417f22265c92deea76a6aecd0fb0f upstream

Add documentation for the SRBDS vulnerability and its mitigation.

 [ bp: Massage.
   jpoimboe: sysfs table strings. ]

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>