Pull non-MM updates from Andrew Morton:

 - hfs and hfsplus kmap API modernization (Fabio Francesco)

 - make crash-kexec work properly when invoked from an NMI-time panic
   (Valentin Schneider)

 - ntfs bugfixes (Hawkins Jiawei)

 - improve IPC msg scalability by replacing atomic_t's with percpu
   counters (Jiebin Sun)

 - nilfs2 cleanups (Minghao Chi)

 - lots of other single patches all over the tree!

* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
  include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
  proc: test how it holds up with mapping'less process
  mailmap: update Frank Rowand email address
  ia64: mca: use strscpy() is more robust and safer
  init/Kconfig: fix unmet direct dependencies
  ia64: update config files
  nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
  fork: remove duplicate included header files
  init/main.c: remove unnecessary (void*) conversions
  proc: mark more files as permanent
  nilfs2: remove the unneeded result variable
  nilfs2: delete unnecessary checks before brelse()
  checkpatch: warn for non-standard fixes tag style
  usr/gen_init_cpio.c: remove unnecessary -1 values from int file
  ipc/msg: mitigate the lock contention with percpu counter
  percpu: add percpu_counter_add_local and percpu_counter_sub_local
  fs/ocfs2: fix repeated words in comments
  relay: use kvcalloc to alloc page array in relay_alloc_page_array
  proc: make config PROC_CHILDREN depend on PROC_FS
  fs: uninline inode_maybe_inc_iversion()
  ...

Print the machine hardware name (UTS_MACHINE) in /proc/sys/kernel/arch.

This helps people who debug kernel with initramfs with minimal environment
(i.e.  without coreutils or even busybox) or allow to open sysfs file
instead of run 'uname -m' in high level languages.

Link: https://lkml.kernel.org/r/20220901194403.3819-1-pvorel@suse.cz
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Sterba <dsterba@suse.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.

A choice is to promote/demote as fast as possible.  But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.

A way to resolve this issue is to restrict the max promoting/demoting
throughput.  It will take longer to finish the promoting/demoting.  But
the workload latency will be better.  This is implemented in this patch as
the page promotion rate limit mechanism.

The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.

A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.

Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull powerpc updates from Michael Ellerman:

 - Add support for syscall stack randomization

 - Add support for atomic operations to the 32 & 64-bit BPF JIT

 - Full support for KASAN on 64-bit Book3E

 - Add a watchdog driver for the new PowerVM hypervisor watchdog

 - Add a number of new selftests for the Power10 PMU support

 - Add a driver for the PowerVM Platform KeyStore

 - Increase the NMI watchdog timeout during live partition migration, to
   avoid timeouts due to increased memory access latency

 - Add support for using the 'linux,pci-domain' device tree property for
   PCI domain assignment

 - Many other small features and fixes

Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N.  Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.

* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
  powerpc/64e: Fix kexec build error
  EDAC/ppc_4xx: Include required of_irq header directly
  powerpc/pci: Fix PHB numbering when using opal-phbid
  powerpc/64: Init jump labels before parse_early_param()
  selftests/powerpc: Avoid GCC 12 uninitialised variable warning
  powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
  powerpc/xive: Fix refcount leak in xive_get_max_prio
  powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
  powerpc/perf: Include caps feature for power10 DD1 version
  powerpc: add support for syscall stack randomization
  powerpc: Move system_call_exception() to syscall.c
  powerpc/powernv: rename remaining rng powernv_ functions to pnv_
  powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
  powerpc/powernv: Avoid crashing if rng is NULL
  selftests/powerpc: Fix matrix multiply assist test
  powerpc/signal: Update comment for clarity
  powerpc: make facility_unavailable_exception 64s
  powerpc/platforms/83xx/suspend: Remove write-only global variable
  powerpc/platforms/83xx/suspend: Prevent unloading the driver
  powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
  ...

During an LPM, while the memory transfer is in progress on the arrival
side, some latencies are generated when accessing not yet transferred
pages on the arrival side. Thus, the NMI watchdog may be triggered too
frequently, which increases the risk to hit an NMI interrupt in a bad
place in the kernel, leading to a kernel panic.

Disabling the Hard Lockup Watchdog until the memory transfer could be a
too strong work around, some users would want this timeout to be
eventually triggered if the system is hanging even during an LPM.

Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply
a factor to the NMI watchdog timeout during an LPM. Just before the CPUs
are stopped for the switchover sequence, the NMI watchdog timer is set
to watchdog_thresh + factor%

A value of 0 has no effect. The default value is 200, meaning that the
NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh
value). Once the memory transfer is achieved, the factor is reset to 0.

Setting this value to a high number is like disabling the NMI watchdog
during an LPM.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-5-ldufour@linux.ibm.com

Text in ``literal`` markup must be separated by word separators, so text
like ``lowwater``% renders incorrectly.  Add the suggested "\ " after two
problematic occurrences.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220624110230.595740-1-steve@sk2.org
[jc: tweaked to use "\ "]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Pull documentation updates from Jonathan Corbet:
 "It was a moderately busy cycle for documentation; highlights include:

   - After a long period of inactivity, the Japanese translations are
     seeing some much-needed maintenance and updating.

   - Reworked IOMMU documentation

   - Some new documentation for static-analysis tools

   - A new overall structure for the memory-management documentation.
     This is an LSFMM outcome that, it is hoped, will help encourage
     developers to fill in the many gaps. Optimism is eternal...but
     hopefully it will work.

   - More Chinese translations.

  Plus the usual typo fixes, updates, etc"

* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
  docs: pdfdocs: Add space for chapter counts >= 100 in TOC
  docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
  input: Docs: correct ntrig.rst typo
  input: Docs: correct atarikbd.rst typos
  MAINTAINERS: Become the docs/zh_CN maintainer
  docs/zh_CN: fix devicetree usage-model translation
  mm,doc: Add new documentation structure
  Documentation: drop more IDE boot options and ide-cd.rst
  Documentation/process: use scripts/get_maintainer.pl on patches
  MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
  docs/trans/ja_JP/howto: Don't mention specific kernel versions
  docs/ja_JP/SubmittingPatches: Request summaries for commit references
  docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
  docs/ja_JP/SubmittingPatches: Randy has moved
  docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
  docs/ja_JP/SubmittingPatches: Update GregKH links
  Documentation/sysctl: document max_rcu_stall_to_panic
  Documentation: add missing angle bracket in cgroup-v2 doc
  Documentation: dev-tools: use literal block instead of code-block
  docs/zh_CN: add vm numa translation
  ...

A semicolon was missing, and the almost-alphabetical-but-not ordering
was confusing, so regroup these by category instead.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

commit dfe564045c65 ("rcu: Panic after fixed number of stalls")
introduced a new systctl but no accompanying documentation.

Add a simple entry to the documentation.

Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Merge more updates from Andrew Morton:
 "Various misc subsystems, before getting into the post-linux-next
  material.

  41 patches.

  Subsystems affected by this patch series: procfs, misc, core-kernel,
  lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
  taskstats, panic, kcov, resource, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
  Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
  kernel/resource: fix kfree() of bootmem memory again
  kcov: properly handle subsequent mmap calls
  kcov: split ioctl handling into locked and unlocked parts
  panic: move panic_print before kmsg dumpers
  panic: add option to dump all CPUs backtraces in panic_print
  docs: sysctl/kernel: add missing bit to panic_print
  taskstats: remove unneeded dead assignment
  kasan: no need to unset panic_on_warn in end_report()
  ubsan: no need to unset panic_on_warn in ubsan_epilogue()
  panic: unset panic_on_warn inside panic()
  docs: kdump: add scp example to write out the dump file
  docs: kdump: update description about sysfs file system support
  arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
  cgroup: use irqsave in cgroup_rstat_flush_locked().
  fat: use pointer to simple type in put_user()
  minix: fix bug when opening a file with O_DIRECT
  ...