linux-stable.git/Documentation/admin-guide/sysctl/kernel.rst, branch linux-5.17.y

random: fix sysctl documentation nits

2022-05-30T07:27:12+00:00

commit 069c4ea6871c18bd368f27756e0f91ffb524a788 upstream.

A semicolon was missing, and the almost-alphabetical-but-not ordering
was confusing, so regroup these by category instead.

Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

random: remove ifdef'd out interrupt bench

2022-05-30T07:27:05+00:00

commit 95e6060c20a7f5db60163274c5222a725ac118f9 upstream.

With tools like kbench9000 giving more finegrained responses, and this
basically never having been used ever since it was initially added,
let's just get rid of this. There *is* still work to be done on the
interrupt handler, but this really isn't the way it's being developed.

Cc: Theodore Ts'o 
Reviewed-by: Eric Biggers 
Reviewed-by: Dominik Brodowski 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

random: always wake up entropy writers after extraction

2022-05-30T07:27:03+00:00

commit 489c7fc44b5740d377e8cfdbf0851036e493af00 upstream.

Now that POOL_BITS == POOL_MIN_BITS, we must unconditionally wake up
entropy writers after every extraction. Therefore there's no point of
write_wakeup_threshold, so we can move it to the dustbin of unused
compatibility sysctls. While we're at it, we can fix a small comparison
where we were waking up after <= min rather than < min.

Cc: Theodore Ts'o 
Suggested-by: Eric Biggers 
Reviewed-by: Eric Biggers 
Reviewed-by: Dominik Brodowski 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

docs: sysctl/kernel: add missing bit to panic_print

2022-04-08T11:59:03+00:00

commit a1ff1de00db21ecb956213f046b79741b64c6b65 upstream.

Patch series "Some improvements on panic_print".

This is a mix of a documentation fix with some additions to the
"panic_print" syscall / parameter.  The goal here is being able to collect
all CPUs backtraces during a panic event and also to enable "panic_print"
in a kdump event - details of the reasoning and design choices in the
patches.

This patch (of 3):

Commit de6da1e8bcf0 ("panic: add an option to replay all the printk
message in buffer") added a new bit to the sysctl/kernel parameter
"panic_print", but the documentation was added only in
kernel-parameters.txt, not in the sysctl guide.

Fix it here by adding bit 5 to sysctl admin-guide documentation.

[rdunlap@infradead.org: fix table format warning]
  Link: https://lkml.kernel.org/r/20220109055635.6999-1-rdunlap@infradead.org

Link: https://lkml.kernel.org/r/20211109202848.610874-1-gpiccoli@igalia.com
Link: https://lkml.kernel.org/r/20211109202848.610874-2-gpiccoli@igalia.com
Fixes: de6da1e8bcf0 ("panic: add an option to replay all the printk message in buffer")
Signed-off-by: Guilherme G. Piccoli 
Reviewed-by: Feng Tang 
Cc: Luis Chamberlain 
Cc: Kees Cook 
Cc: Iurii Zaikin 
Cc: Samuel Iglesias Gonsalvez 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

arm64: perf: Add userspace counter access disable switch

2021-12-14T11:30:54+00:00

Like x86, some users may want to disable userspace PMU counter
altogether. Add a sysctl 'perf_user_access' file to control userspace
counter access. The default is '0' which is disabled. Writing '1'
enables access.

Note that x86 supports globally enabling user access by writing '2' to
/sys/bus/event_source/devices/cpu/rdpmc. As there's not existing
userspace support to worry about, this shouldn't be necessary for Arm.
It could be added later if the need arises.

Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Arnaldo Carvalho de Melo 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Catalin Marinas 
Cc: linux-perf-users@vger.kernel.org
Acked-by: Will Deacon 
Reviewed-by: Mark Rutland 
Signed-off-by: Rob Herring 
Link: https://lore.kernel.org/r/20211208201124.310740-4-robh@kernel.org
Signed-off-by: Will Deacon

docs: accounting: update delay-accounting.rst reference

2021-11-17T13:12:14+00:00

The file name: accounting/delay-accounting.rst
should be, instead: Documentation/accounting/delay-accounting.rst.

Also, there's no need to use doc:`foo`, as automarkup.py will
automatically handle plain text mentions to Documentation/
files.

So, update its cross-reference accordingly.

Fixes: fcb501704554 ("delayacct: Document task_delayacct sysctl")
Fixes: c3123552aad3 ("docs: accounting: convert to ReST")
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Jonathan Corbet

Merge branch 'akpm' (patches from Andrew)

2021-06-30T00:29:11+00:00

Merge misc updates from Andrew Morton:
 "191 patches.

  Subsystems affected by this patch series: kthread, ia64, scripts,
  ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
  slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
  mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
  pagealloc, and memory-failure)"

* emailed patches from Andrew Morton : (191 commits)
  mm,hwpoison: make get_hwpoison_page() call get_any_page()
  mm,hwpoison: send SIGBUS with error virutal address
  mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
  mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
  mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
  mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
  docs: remove description of DISCONTIGMEM
  arch, mm: remove stale mentions of DISCONIGMEM
  mm: remove CONFIG_DISCONTIGMEM
  m68k: remove support for DISCONTIGMEM
  arc: remove support for DISCONTIGMEM
  arc: update comment about HIGHMEM implementation
  alpha: remove DISCONTIGMEM and NUMA
  mm/page_alloc: move free_the_page
  mm/page_alloc: fix counting of managed_pages
  mm/page_alloc: improve memmap_pages dbg msg
  mm: drop SECTION_SHIFT in code comments
  mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
  mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
  mm/page_alloc: scale the number of pages that are batch freed
  ...

doc: watchdog: modify the doc related to "watchdog/%u"

2021-06-29T17:53:46+00:00

"watchdog/%u" threads has be replaced by cpu_stop_work.  The current
description is extremely misleading.

Link: https://lkml.kernel.org/r/1619687073-24686-5-git-send-email-wangqing@vivo.com
Signed-off-by: Wang Qing 
Reviewed-by: Petr Mladek 
Cc: "Guilherme G. Piccoli" 
Cc: Joe Perches 
Cc: Jonathan Corbet 
Cc: Kees Cook 
Cc: Mauro Carvalho Chehab 
Cc: Qais Yousef 
Cc: Randy Dunlap 
Cc: Santosh Sivaraj 
Cc: Stephen Kitt 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'docs-5.14' of git://git.lwn.net/linux

2021-06-28T23:53:05+00:00

Pull documentation updates from Jonathan Corbet:
 "This was a reasonably active cycle for documentation; this includes:

   - Some kernel-doc cleanups. That script is still regex onslaught from
     hell, but it has gotten a little better.

   - Improvements to the checkpatch docs, which are also used by the
     tool itself.

   - A major update to the pathname lookup documentation.

   - Elimination of :doc: markup, since our automarkup magic can create
     references from filenames without all the extra noise.

   - The flurry of Chinese translation activity continues.

  Plus, of course, the usual collection of updates, typo fixes, and
  warning fixes"

* tag 'docs-5.14' of git://git.lwn.net/linux: (115 commits)
  docs: path-lookup: use bare function() rather than literals
  docs: path-lookup: update symlink description
  docs: path-lookup: update get_link() ->follow_link description
  docs: path-lookup: update WALK_GET, WALK_PUT desc
  docs: path-lookup: no get_link()
  docs: path-lookup: update i_op->put_link and cookie description
  docs: path-lookup: i_op->follow_link replaced with i_op->get_link
  docs: path-lookup: Add macro name to symlink limit description
  docs: path-lookup: remove filename_mountpoint
  docs: path-lookup: update do_last() part
  docs: path-lookup: update path_mountpoint() part
  docs: path-lookup: update path_to_nameidata() part
  docs: path-lookup: update follow_managed() part
  docs: Makefile: Use CONFIG_SHELL not SHELL
  docs: Take a little noise out of the build process
  docs: x86: avoid using ReST :doc:`foo` markup
  docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
  ...

docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup

2021-06-17T19:24:36+00:00

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/12abd2290c7ebc05c89178d2556bea740bd70fac.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet