linux-stable.git, branch v5.9.4 Linux kernel stable tree Linux 5.9.4 2020-11-04T20:53:37+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-11-04T20:53:37+00:00 ad2f76f72d803692f83312b4b5b0ffc03e570698 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/copy_mc: Introduce copy_mc_enhanced_fast_string() 2020-11-04T17:09:42+00:00 Dan Williams dan.j.williams@intel.com 2020-10-06T03:40:25+00:00 3dc43f5e5c4dbfce7483d206017439bd6507a404 commit 5da8e4a658109e3b7e1f45ae672b7c06ac3e7158 upstream. The motivations to go rework memcpy_mcsafe() are that the benefit of doing slow and careful copies is obviated on newer CPUs, and that the current opt-in list of CPUs to instrument recovery is broken relative to those CPUs. There is no need to keep an opt-in list up to date on an ongoing basis if pmem/dax operations are instrumented for recovery by default. With recovery enabled by default the old "mcsafe_key" opt-in to careful copying can be made a "fragile" opt-out. Where the "fragile" list takes steps to not consume poison across cachelines. The discussion with Linus made clear that the current "_mcsafe" suffix was imprecise to a fault. The operations that are needed by pmem/dax are to copy from a source address that might throw #MC to a destination that may write-fault, if it is a user page. So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate the separate precautions taken on source and destination. copy_mc_to_kernel() is introduced as a non-SMAP version that does not expect write-faults on the destination, but is still prepared to abort with an error code upon taking #MC. The original copy_mc_fragile() implementation had negative performance implications since it did not use the fast-string instruction sequence to perform copies. For this reason copy_mc_to_kernel() fell back to plain memcpy() to preserve performance on platforms that did not indicate the capability to recover from machine check exceptions. However, that capability detection was not architectural and now that some platforms can recover from fast-string consumption of memory errors the memcpy() fallback now causes these more capable platforms to fail. Introduce copy_mc_enhanced_fast_string() as the fast default implementation of copy_mc_to_kernel() and finalize the transition of copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'. With this in place, copy_mc_to_kernel() is fast and recovery-ready by default regardless of hardware capability. Thanks to Vivek for identifying that copy_user_generic() is not suitable as the copy_mc_to_user() backend since the #MC handler explicitly checks ex_has_fault_handler(). Thanks to the 0day robot for catching a performance bug in the x86/copy_mc_to_user implementation. [ bp: Add the "why" for this change from the 0/2th message, massage. ] Fixes: 92b0729c34ca ("x86/mm, x86/mce: Add memcpy_mcsafe()") Reported-by: Erwin Tsaur <erwin.tsaur@intel.com> Reported-by: 0day robot <lkp@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Tested-by: Erwin Tsaur <erwin.tsaur@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5da8e4a658109e3b7e1f45ae672b7c06ac3e7158 upstream.

The motivations to go rework memcpy_mcsafe() are that the benefit of
doing slow and careful copies is obviated on newer CPUs, and that the
current opt-in list of CPUs to instrument recovery is broken relative to
those CPUs.  There is no need to keep an opt-in list up to date on an
ongoing basis if pmem/dax operations are instrumented for recovery by
default. With recovery enabled by default the old "mcsafe_key" opt-in to
careful copying can be made a "fragile" opt-out. Where the "fragile"
list takes steps to not consume poison across cachelines.

The discussion with Linus made clear that the current "_mcsafe" suffix
was imprecise to a fault. The operations that are needed by pmem/dax are
to copy from a source address that might throw #MC to a destination that
may write-fault, if it is a user page.

So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate
the separate precautions taken on source and destination.
copy_mc_to_kernel() is introduced as a non-SMAP version that does not
expect write-faults on the destination, but is still prepared to abort
with an error code upon taking #MC.

The original copy_mc_fragile() implementation had negative performance
implications since it did not use the fast-string instruction sequence
to perform copies. For this reason copy_mc_to_kernel() fell back to
plain memcpy() to preserve performance on platforms that did not indicate
the capability to recover from machine check exceptions. However, that
capability detection was not architectural and now that some platforms
can recover from fast-string consumption of memory errors the memcpy()
fallback now causes these more capable platforms to fail.

Introduce copy_mc_enhanced_fast_string() as the fast default
implementation of copy_mc_to_kernel() and finalize the transition of
copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'.
With this in place, copy_mc_to_kernel() is fast and recovery-ready by
default regardless of hardware capability.

Thanks to Vivek for identifying that copy_user_generic() is not suitable
as the copy_mc_to_user() backend since the #MC handler explicitly checks
ex_has_fault_handler(). Thanks to the 0day robot for catching a
performance bug in the x86/copy_mc_to_user implementation.

 [ bp: Add the "why" for this change from the 0/2th message, massage. ]

Fixes: 92b0729c34ca ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
Reported-by: 0day robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Erwin Tsaur <erwin.tsaur@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}() 2020-11-04T17:09:05+00:00 Dan Williams dan.j.williams@intel.com 2020-10-06T03:40:16+00:00 5fec7e5a28627138223aa20f5ff484898955ff77 commit ec6347bb43395cb92126788a1a5b25302543f815 upstream. In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ec6347bb43395cb92126788a1a5b25302543f815 upstream.

In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.

Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:

  On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
  >
  > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
  > >
  > > However now I see that copy_user_generic() works for the wrong reason.
  > > It works because the exception on the source address due to poison
  > > looks no different than a write fault on the user address to the
  > > caller, it's still just a short copy. So it makes copy_to_user() work
  > > for the wrong reason relative to the name.
  >
  > Right.
  >
  > And it won't work that way on other architectures. On x86, we have a
  > generic function that can take faults on either side, and we use it
  > for both cases (and for the "in_user" case too), but that's an
  > artifact of the architecture oddity.
  >
  > In fact, it's probably wrong even on x86 - because it can hide bugs -
  > but writing those things is painful enough that everybody prefers
  > having just one function.

Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().

Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.

One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.

 [ bp: Massage a bit. ]

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()" 2020-11-04T17:08:28+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-11-04T17:05:30+00:00 8b5145ba3afc24f9749e57d3c0e6bba0b129dc4d This reverts commit a85748ed9eb70108f9605558f2754ca94ee91401 which is commit ec6347bb43395cb92126788a1a5b25302543f815 upstream. We had a mistake when merging a later patch in this series due to some file movements, so revert this change for now, as we will add it back in a later commit. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit a85748ed9eb70108f9605558f2754ca94ee91401 which is
commit ec6347bb43395cb92126788a1a5b25302543f815 upstream.

We had a mistake when merging a later patch in this series due to some
file movements, so revert this change for now, as we will add it back in
a later commit.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "x86/copy_mc: Introduce copy_mc_enhanced_fast_string()" 2020-11-04T17:08:21+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-11-04T17:05:21+00:00 8406c90cdc780dc86d9daabe9d38f0583467dc4b This reverts commit 4f28b1fb9d1daf3b98710a4b0520fa0c1767cd16 which is commit 5da8e4a658109e3b7e1f45ae672b7c06ac3e7158 upstream. We had a mistake when merging a later patch in this series due to some file movements, so revert this change for now, as we will add it back in a later commit. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 4f28b1fb9d1daf3b98710a4b0520fa0c1767cd16 which is
commit 5da8e4a658109e3b7e1f45ae672b7c06ac3e7158 upstream.

We had a mistake when merging a later patch in this series due to some
file movements, so revert this change for now, as we will add it back in
a later commit.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.9.3 2020-11-01T11:47:10+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-11-01T11:47:10+00:00 36a4324fe95cdd1403045d0d1f1871f062179892 Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20201031113500.031279088@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20201031113500.031279088@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: marvell: comphy: Convert internal SMCC firmware return codes to errno 2020-11-01T11:47:10+00:00 Pali Rohár pali@kernel.org 2020-09-02T14:43:43+00:00 2e9e042576a543eb296bc2f07c1889ac57324a75 commit ea17a0f153af2cd890e4ce517130dcccaa428c13 upstream. Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ea17a0f153af2cd890e4ce517130dcccaa428c13 upstream.

Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware
return codes to phy caller. This patch converts SMCC error codes to
standard linux errno codes. Include file linux/arm-smccc.h already provides
defines for SMCC error codes, so use them instead of custom driver defines.
Note that return value is signed 32bit, but stored in unsigned long type
with zero padding.

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: rtsx: do not setting OC_POWER_DOWN reg in rtsx_pci_init_ocp() 2020-11-01T11:47:10+00:00 Ricky Wu ricky_wu@realtek.com 2020-08-24T03:00:06+00:00 0aa1346563336cd9123544b53a7fecf4fe7110b1 commit 551b6729578a8981c46af964c10bf7d5d9ddca83 upstream. this power saving action in rtsx_pci_init_ocp() cause INTEL-NUC6 platform missing card reader Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20200824030006.30033-1-ricky_wu@realtek.com Cc: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 551b6729578a8981c46af964c10bf7d5d9ddca83 upstream.

this power saving action in rtsx_pci_init_ocp() cause INTEL-NUC6 platform
missing card reader

Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200824030006.30033-1-ricky_wu@realtek.com
Cc: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_uring: don't reuse linked_timeout 2020-11-01T11:47:09+00:00 Pavel Begunkov asml.silence@gmail.com 2020-10-20T22:50:27+00:00 753456ece6b47718e2cbde595d3f43b82ef1ebf6 commit ff5771613cd7b3a76cd16cb54aa81d30d3c11d48 upstream. Clear linked_timeout for next requests in __io_queue_sqe() so we won't queue it up unnecessary when it's going to be punted. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Cc: stable@vger.kernel.org # v5.9 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff5771613cd7b3a76cd16cb54aa81d30d3c11d48 upstream.

Clear linked_timeout for next requests in __io_queue_sqe() so we won't
queue it up unnecessary when it's going to be punted.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/gntdev.c: Mark pages as dirty 2020-11-01T11:47:09+00:00 Souptick Joarder jrdr.linux@gmail.com 2020-09-06T06:51:53+00:00 4683c5407bd5ed473063993b7593f5d8084daceb commit 779055842da5b2e508f3ccf9a8153cb1f704f566 upstream. There seems to be a bug in the original code when gntdev_get_page() is called with writeable=true then the page needs to be marked dirty before being put. To address this, a bool writeable is added in gnt_dev_copy_batch, set it in gntdev_grant_copy_seg() (and drop `writeable` argument to gntdev_get_page()) and then, based on batch->writeable, use set_page_dirty_lock(). Fixes: a4cdb556cae0 (xen/gntdev: add ioctl for grant copy) Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1599375114-32360-1-git-send-email-jrdr.linux@gmail.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 779055842da5b2e508f3ccf9a8153cb1f704f566 upstream.

There seems to be a bug in the original code when gntdev_get_page()
is called with writeable=true then the page needs to be marked dirty
before being put.

To address this, a bool writeable is added in gnt_dev_copy_batch, set
it in gntdev_grant_copy_seg() (and drop `writeable` argument to
gntdev_get_page()) and then, based on batch->writeable, use
set_page_dirty_lock().

Fixes: a4cdb556cae0 (xen/gntdev: add ioctl for grant copy)
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1599375114-32360-1-git-send-email-jrdr.linux@gmail.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>