linux-stable.git, branch v5.4.64

Linux 5.4.64

2020-09-09T17:12:37+00:00

Tested-by: Shuah Khan 
Tested-by: Linux Kernel Functional Testing 
Tested-by: Jon Hunter 
Tested-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()

2020-09-09T17:12:37+00:00

commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream.

The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.

Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cfg80211: regulatory: reject invalid hints

2020-09-09T17:12:37+00:00

commit 47caf685a6854593348f216e0b489b71c10cbe03 upstream.

Reject invalid hints early in order to not cause a kernel
WARN later if they're restored to or similar.

Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee
Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

mm/khugepaged.c: fix khugepaged's request size in collapse_file

2020-09-09T17:12:37+00:00

commit e5a59d308f52bb0052af5790c22173651b187465 upstream.

collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to
be read to page_cache_sync_readahead().  The intent was probably to read
a single page.  Fix it to use the number of pages to the end of the
window instead.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: David Howells 
Signed-off-by: Matthew Wilcox (Oracle) 
Signed-off-by: Andrew Morton 
Reviewed-by: Matthew Wilcox (Oracle) 
Acked-by: Song Liu 
Acked-by: Yang Shi 
Acked-by: Pankaj Gupta 
Cc: Eric Biggers 
Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: fix a race between hugetlb sysctl handlers

2020-09-09T17:12:37+00:00

commit 17743798d81238ab13050e8e2833699b54e15467 upstream.

There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.

  CPU0:                                 CPU1:
                                        proc_sys_write
  hugetlb_sysctl_handler                  proc_sys_call_handler
  hugetlb_sysctl_handler_common             hugetlb_sysctl_handler
    table->data = &tmp;                       hugetlb_sysctl_handler_common
                                                table->data = &tmp;
      proc_doulongvec_minmax
        do_proc_doulongvec_minmax           sysctl_head_finish
          __do_proc_doulongvec_minmax         unuse_table
            i = table->data;
            *i = val;  // corrupt CPU1's stack

Fix this by duplicating the `table`, and only update the duplicate of
it.  And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.

The following oops was seen:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor instruction fetch in kernel mode
    #PF: error_code(0x0010) - not-present page
    Code: Bad RIP value.
    ...
    Call Trace:
     ? set_max_huge_pages+0x3da/0x4f0
     ? alloc_pool_huge_page+0x150/0x150
     ? proc_doulongvec_minmax+0x46/0x60
     ? hugetlb_sysctl_handler_common+0x1c7/0x200
     ? nr_hugepages_store+0x20/0x20
     ? copy_fd_bitmaps+0x170/0x170
     ? hugetlb_sysctl_handler+0x1e/0x20
     ? proc_sys_call_handler+0x2f1/0x300
     ? unregister_sysctl_table+0xb0/0xb0
     ? __fd_install+0x78/0x100
     ? proc_sys_write+0x14/0x20
     ? __vfs_write+0x4d/0x90
     ? vfs_write+0xef/0x240
     ? ksys_write+0xc0/0x160
     ? __ia32_sys_read+0x50/0x50
     ? __close_fd+0x129/0x150
     ? __x64_sys_write+0x43/0x50
     ? do_syscall_64+0x6c/0x200
     ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes")
Signed-off-by: Muchun Song 
Signed-off-by: Andrew Morton 
Reviewed-by: Mike Kravetz 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

checkpatch: fix the usage of capture group ( ... )

2020-09-09T17:12:37+00:00

commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream.

The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized.  This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".

I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.

This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog").  It
has been in the script since then.

The author intended to store the match made by capture group in variable
`$1`.  This should have contained the name of the file as `[\w/]+`
matched.  However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.

Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.

Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey 
Signed-off-by: Andrew Morton 
Tested-by: Lukas Bulwahn 
Reviewed-by: Lukas Bulwahn 
Cc: Joe Perches 
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

sdhci: tegra: Add missing TMCLK for data timeout

2020-09-09T17:12:36+00:00

commit 8048822bac01936fda2c7b924a52131da81e6198 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.

USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.

Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.

So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable  # 5.4
Tested-by: Jon Hunter 
Reviewed-by: Jon Hunter 
Acked-by: Adrian Hunter 
Signed-off-by: Sowjanya Komatineni 
Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

perf record: Correct the help info of option "--no-bpf-event"

2020-09-09T17:12:36+00:00

commit a060c1f12b525ba828f871eff3127dabf8daa1e6 upstream.

The help info of option "--no-bpf-event" is wrongly described as "record
bpf events", correct it.

Committer testing:

  $ perf record -h bpf

   Usage: perf record [] []
      or: perf record [] --  []

          --clang-opt 
                            options passed to clang when compiling BPF scriptlets
          --clang-path 
                            clang binary to use for compiling BPF scriptlets
          --no-bpf-event    do not record bpf events

  $

Fixes: 71184c6ab7e6 ("perf record: Replace option --bpf-event with --no-bpf-event")
Signed-off-by: Wei Li 
Acked-by: Song Liu 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Alexander Shishkin 
Cc: Hanjun Guo 
Cc: Jiri Olsa 
Cc: Li Bin 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

vfio/pci: Fix SR-IOV VF handling with MMIO blocking

2020-09-09T17:12:36+00:00

commit ebfa440ce38b7e2e04c3124aa89c8a9f4094cf21 upstream.

SR-IOV VFs do not implement the memory enable bit of the command
register, therefore this bit is not set in config space after
pci_enable_device().  This leads to an unintended difference
between PF and VF in hand-off state to the user.  We can correct
this by setting the initial value of the memory enable bit in our
virtualized config space.  There's really no need however to
ever fault a user on a VF though as this would only indicate an
error in the user's management of the enable bit, versus a PF
where the same access could trigger hardware faults.

Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Alex Williamson 
Signed-off-by: Greg Kroah-Hartman

mm: madvise: fix vma user-after-free

2020-09-09T17:12:36+00:00

commit 7867fd7cc44e63c6673cd0f8fea155456d34d0de upstream.

The syzbot reported the below use-after-free:

  BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline]
  BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline]
  BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
  Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996

  CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x18f/0x20d lib/dump_stack.c:118
    print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
    __kasan_report mm/kasan/report.c:513 [inline]
    kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
    madvise_willneed mm/madvise.c:293 [inline]
    madvise_vma mm/madvise.c:942 [inline]
    do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
    do_madvise mm/madvise.c:1169 [inline]
    __do_sys_madvise mm/madvise.c:1171 [inline]
    __se_sys_madvise mm/madvise.c:1169 [inline]
    __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Allocated by task 9992:
    kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482
    vm_area_alloc+0x1c/0x110 kernel/fork.c:347
    mmap_region+0x8e5/0x1780 mm/mmap.c:1743
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 9992:
    kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693
    remove_vma+0x132/0x170 mm/mmap.c:184
    remove_vma_list mm/mmap.c:2613 [inline]
    __do_munmap+0x743/0x1170 mm/mmap.c:2869
    do_munmap mm/mmap.c:2877 [inline]
    mmap_region+0x257/0x1780 mm/mmap.c:1716
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

It is because vma is accessed after releasing mmap_lock, but someone
else acquired the mmap_lock and the vma is gone.

Releasing mmap_lock after accessing vma should fix the problem.

Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()")
Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com
Signed-off-by: Yang Shi 
Signed-off-by: Andrew Morton 
Reviewed-by: Andrew Morton 
Reviewed-by: Jan Kara 
Cc: 	[5.4+]
Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman