linux-stable.git, branch v5.4.5

Linux 5.4.5

2019-12-18T15:09:17+00:00

r8169: add missing RX enabling for WoL on RTL8125

2019-12-18T15:09:17+00:00

[ Upstream commit 00222d1394104f0fd6c01ca9f578afec9e0f148b ]

RTL8125 also requires to enable RX for WoL.

v2: add missing Fixes tag

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Signed-off-by: Heiner Kallweit 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: unregister the PTP clock on deinit

2019-12-18T15:09:14+00:00

[ Upstream commit 9385973fe8db9743fa93bf17245635be4eb8c4a6 ]

Currently a switch driver deinit frees the regmaps, but the PTP clock is
still out there, available to user space via /dev/ptpN. Any PTP
operation is a ticking time bomb, since it will attempt to use the freed
regmaps and thus trigger kernel panics:

[    4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy
[    4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22
[    4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22
[    6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
[    6.367090] Mem abort info:
[    6.369888]   ESR = 0x96000046
[    6.369891]   EC = 0x25: DABT (current EL), IL = 32 bits
[    6.369892]   SET = 0, FnV = 0
[    6.369894]   EA = 0, S1PTW = 0
[    6.369895] Data abort info:
[    6.369897]   ISV = 0, ISS = 0x00000046
[    6.369899]   CM = 0, WnR = 1
[    6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000
[    6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000
[    6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP
[    6.420443] Modules linked in:
[    6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204
[    6.431273] Hardware name: LS1028A RDB Board (DT)
[    6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO)
[    6.440802] pc : css_release+0x24/0x58
[    6.444561] lr : regmap_read+0x40/0x78
[    6.448316] sp : ffff800010513cc0
[    6.451636] x29: ffff800010513cc0 x28: ffff002055873040
[    6.456963] x27: 0000000000000000 x26: 0000000000000000
[    6.462289] x25: 0000000000000000 x24: 0000000000000000
[    6.467617] x23: 0000000000000000 x22: 0000000000000080
[    6.472944] x21: ffff800010513d44 x20: 0000000000000080
[    6.478270] x19: 0000000000000000 x18: 0000000000000000
[    6.483596] x17: 0000000000000000 x16: 0000000000000000
[    6.488921] x15: 0000000000000000 x14: 0000000000000000
[    6.494247] x13: 0000000000000000 x12: 0000000000000000
[    6.499573] x11: 0000000000000000 x10: 0000000000000000
[    6.504899] x9 : 0000000000000000 x8 : 0000000000000000
[    6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0
[    6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0
[    6.520876] x3 : 0000000000000088 x2 : ffff800010513d44
[    6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0
[    6.531528] Call trace:
[    6.533977]  css_release+0x24/0x58
[    6.537385]  regmap_read+0x40/0x78
[    6.540795]  __ocelot_read_ix+0x6c/0xa0
[    6.544641]  ocelot_ptp_gettime64+0x4c/0x110
[    6.548921]  ptp_clock_gettime+0x4c/0x58
[    6.552853]  pc_clock_gettime+0x5c/0xa8
[    6.556699]  __arm64_sys_clock_gettime+0x68/0xc8
[    6.561331]  el0_svc_common.constprop.2+0x7c/0x178
[    6.566133]  el0_svc_handler+0x34/0xa0
[    6.569891]  el0_sync_handler+0x114/0x1d0
[    6.573908]  el0_sync+0x140/0x180
[    6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663)
[    6.583349] ---[ end trace d196b9b14cdae2da ]---
[    6.587977] Kernel panic - not syncing: Fatal exception
[    6.593216] SMP: stopping secondary CPUs
[    6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000
[    6.603261] PHYS_OFFSET: 0xffffd0a7c0000000
[    6.607454] CPU features: 0x10002,21806008
[    6.611558] Memory Limit: none

And now that ocelot->ptp_clock is checked at exit, prevent a potential
error where ptp_clock_register returned a pointer-encoded error, which
we are keeping in the ocelot private data structure. So now,
ocelot->ptp_clock is now either NULL or a valid pointer.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Cc: Antoine Tenart 
Reviewed-by: Florian Fainelli 
Signed-off-by: Vladimir Oltean 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ionic: keep users rss hash across lif reset

2019-12-18T15:09:12+00:00

[ Upstream commit ffac2027e18f006f42630f2e01a8a9bd8dc664b5 ]

If the user has specified their own RSS hash key, don't
lose it across queue resets such as DOWN/UP, MTU change,
and number of channels change.  This is fixed by moving
the key initialization to a little earlier in the lif
creation.

Also, let's clean up the RSS config a little better on
the way down by setting it all to 0.

Fixes: aa3198819bea ("ionic: Add RSS support")
Signed-off-by: Shannon Nelson 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

xdp: obtain the mem_id mutex before trying to remove an entry.

2019-12-18T15:09:10+00:00

[ Upstream commit 86c76c09898332143be365c702cf8d586ed4ed21 ]

A lockdep splat was observed when trying to remove an xdp memory
model from the table since the mutex was obtained when trying to
remove the entry, but not before the table walk started:

Fix the splat by obtaining the lock before starting the table walk.

Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.")
Reported-by: Grygorii Strashko 
Signed-off-by: Jonathan Lemon 
Tested-by: Grygorii Strashko 
Acked-by: Jesper Dangaard Brouer 
Acked-by: Ilias Apalodimas 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

page_pool: do not release pool until inflight == 0.

2019-12-18T15:09:07+00:00

[ Upstream commit c3f812cea0d7006469d1cf33a4a9f0a12bb4b3a3 ]

The page pool keeps track of the number of pages in flight, and
it isn't safe to remove the pool until all pages are returned.

Disallow removing the pool until all pages are back, so the pool
is always available for page producers.

Make the page pool responsible for its own delayed destruction
instead of relying on XDP, so the page pool can be used without
the xdp memory model.

When all pages are returned, free the pool and notify xdp if the
pool is registered with the xdp memory system.  Have the callback
perform a table walk since some drivers (cpsw) may share the pool
among multiple xdp_rxq_info.

Note that the increment of pages_state_release_cnt may result in
inflight == 0, resulting in the pool being released.

Fixes: d956a048cd3f ("xdp: force mem allocator removal and periodic warning")
Signed-off-by: Jonathan Lemon 
Acked-by: Jesper Dangaard Brouer 
Acked-by: Ilias Apalodimas 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/mlx5e: ethtool, Fix analysis of speed setting

2019-12-18T15:09:06+00:00

[ Upstream commit 3d7cadae51f1b7f28358e36d0a1ce3f0ae2eee60 ]

When setting speed to 100G via ethtool (AN is set to off), only 25G*4 is
configured while the user, who has an advanced HW which supports
extended PTYS, expects also 50G*2 to be configured.
With this patch, when extended PTYS mode is available, configure
PTYS via extended fields.

Fixes: 4b95840a6ced ("net/mlx5e: Fix matching of speed to PRM link modes")
Signed-off-by: Aya Levin 
Reviewed-by: Eran Ben Elisha 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix translation of link mode into speed

2019-12-18T15:09:04+00:00

[ Upstream commit 6d485e5e555436d2c13accdb10807328c4158a17 ]

Add a missing value in translation of PTYS ext_eth_proto_oper to its
corresponding speed. When ext_eth_proto_oper bit 10 is set, ethtool
shows unknown speed. With this fix, ethtool shows speed is 100G as
expected.

Fixes: a08b4ed1373d ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register")
Signed-off-by: Aya Levin 
Reviewed-by: Eran Ben Elisha 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix freeing flow with kfree() and not kvfree()

2019-12-18T15:09:03+00:00

[ Upstream commit a23dae79fb6555c808528707c6389345d0b0c189 ]

Flows are allocated with kzalloc() so free with kfree().

Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Signed-off-by: Roi Dayan 
Reviewed-by: Eli Britstein 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix SFF 8472 eeprom length

2019-12-18T15:09:00+00:00

[ Upstream commit c431f8597863a91eea6024926e0c1b179cfa4852 ]

SFF 8472 eeprom length is 512 bytes. Fix module info return value to
support 512 bytes read.

Fixes: ace329f4ab3b ("net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query")
Signed-off-by: Eran Ben Elisha 
Reviewed-by: Aya Levin 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Greg Kroah-Hartman