linux-stable.git, branch v5.4.296 Linux kernel stable tree Linux 5.4.296 2025-07-17T16:25:06+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2025-07-17T16:25:06+00:00 04b7726c3cdd2fb4da040c2b898bcf405ed607bd Link: https://lore.kernel.org/r/20250715130800.293690950@linuxfoundation.org Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20250716141302.507854168@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Link: https://lore.kernel.org/r/20250715130800.293690950@linuxfoundation.org
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250716141302.507854168@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: ipv6: Discard next-hop MTU less than minimum link MTU 2025-07-17T16:25:06+00:00 Georg Kohmann geokohma@cisco.com 2020-10-07T12:53:02+00:00 ecdb232730f00a450f0623de5ac71b0b93c696fa commit 4a65dff81a04f874fa6915c7f069b4dc2c4010e4 upstream. When a ICMPV6_PKT_TOOBIG report a next-hop MTU that is less than the IPv6 minimum link MTU, the estimated path MTU is reduced to the minimum link MTU. This behaviour breaks TAHI IPv6 Core Conformance Test v6LC4.1.6: Packet Too Big Less than IPv6 MTU. Referring to RFC 8201 section 4: "If a node receives a Packet Too Big message reporting a next-hop MTU that is less than the IPv6 minimum link MTU, it must discard it. A node must not reduce its estimate of the Path MTU below the IPv6 minimum link MTU on receipt of a Packet Too Big message." Drop the path MTU update if reported MTU is less than the minimum link MTU. Signed-off-by: Georg Kohmann <geokohma@cisco.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4a65dff81a04f874fa6915c7f069b4dc2c4010e4 upstream.

When a ICMPV6_PKT_TOOBIG report a next-hop MTU that is less than the IPv6
minimum link MTU, the estimated path MTU is reduced to the minimum link
MTU. This behaviour breaks TAHI IPv6 Core Conformance Test v6LC4.1.6:
Packet Too Big Less than IPv6 MTU.

Referring to RFC 8201 section 4: "If a node receives a Packet Too Big
message reporting a next-hop MTU that is less than the IPv6 minimum link
MTU, it must discard it. A node must not reduce its estimate of the Path
MTU below the IPv6 minimum link MTU on receipt of a Packet Too Big
message."

Drop the path MTU update if reported MTU is less than the minimum link MTU.

Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/mm: Disable hugetlb page table sharing on 32-bit 2025-07-17T16:25:06+00:00 Jann Horn jannh@google.com 2025-07-02T08:32:04+00:00 b2fdd7f1b6692402bf8b620bc78fd62d1eb8e13a commit 76303ee8d54bff6d9a6d55997acd88a6c2ba63cf upstream. Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86. Page table sharing requires at least three levels because it involves shared references to PMD tables; 32-bit x86 has either two-level paging (without PAE) or three-level paging (with PAE), but even with three-level paging, having a dedicated PGD entry for hugetlb is only barely possible (because the PGD only has four entries), and it seems unlikely anyone's actually using PMD sharing on 32-bit. Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which has 2-level paging) became particularly problematic after commit 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count"), since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and the `pt_share_count` (for PMDs) share the same union storage - and with 2-level paging, PMDs are PGDs. (For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the configuration of page tables such that it is never enabled with 2-level paging.) Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org Fixes: cfe28c5d63d8 ("x86: mm: Remove x86 version of huge_pmd_share.") Reported-by: Vitaly Chikunov <vt@altlinux.org> Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Vitaly Chikunov <vt@altlinux.org> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 76303ee8d54bff6d9a6d55997acd88a6c2ba63cf upstream.

Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86.
Page table sharing requires at least three levels because it involves
shared references to PMD tables; 32-bit x86 has either two-level paging
(without PAE) or three-level paging (with PAE), but even with
three-level paging, having a dedicated PGD entry for hugetlb is only
barely possible (because the PGD only has four entries), and it seems
unlikely anyone's actually using PMD sharing on 32-bit.

Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which
has 2-level paging) became particularly problematic after commit
59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count"),
since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and
the `pt_share_count` (for PMDs) share the same union storage - and with
2-level paging, PMDs are PGDs.

(For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the
configuration of page tables such that it is never enabled with 2-level
paging.)

Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org
Fixes: cfe28c5d63d8 ("x86: mm: Remove x86 version of huge_pmd_share.")
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Vitaly Chikunov <vt@altlinux.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID 2025-07-17T16:25:06+00:00 Hans de Goede hdegoede@redhat.com 2024-01-26T16:07:24+00:00 e69029688612c72c1de17a9d4a81a0c4d3c855e6 commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 upstream. After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") not only the getid command is skipped, but also the de-activating of the keyboard at the end of atkbd_probe(), potentially re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd - fix multi-byte scancode handling on reconnect"). Make sure multi-byte scancode handling on reconnect is still handled correctly by not skipping the atkbd_deactivate() call. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 upstream.

After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") not only the getid command is skipped, but also
the de-activating of the keyboard at the end of atkbd_probe(), potentially
re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd -
fix multi-byte scancode handling on reconnect").

Make sure multi-byte scancode handling on reconnect is still handled
correctly by not skipping the atkbd_deactivate() call.

Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras 2025-07-17T16:25:05+00:00 Chia-Lin Kao (AceLan) acelan.kao@canonical.com 2025-05-06T05:50:15+00:00 35f1a5360ac68d9629abbb3930a0a07901cba296 [ Upstream commit 54bae4c17c11688339eb73a04fd24203bb6e7494 ] The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C) report a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. Add these 2 devices to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 54bae4c17c11688339eb73a04fd24203bb6e7494 ]

The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.

Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.

Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY 2025-07-17T16:25:05+00:00 Zhang Heng zhangheng@kylinos.cn 2025-06-05T07:29:59+00:00 99599f99894594faa310c586f7f36505feccf098 [ Upstream commit 1a8953f4f7746c6a515989774fe03047c522c613 ] MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an audio device is requested to get specific report id, the following error may occur. [ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd [ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00 [ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device [ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology [ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001 [ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35 [ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2 [ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint [ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) Ignore HID interface. The device is working properly. Signed-off-by: Zhang Heng <zhangheng@kylinos.cn> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1a8953f4f7746c6a515989774fe03047c522c613 ]

MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.

[  562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[  563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[  563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[  563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[  563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[  563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[  563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[  563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[  568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)

Ignore HID interface. The device is working properly.

Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
vt: add missing notification when switching back to text mode 2025-07-17T16:25:05+00:00 Nicolas Pitre npitre@baylibre.com 2025-06-11T01:41:44+00:00 7549410b27099cf731749c261a7e90b6119bbdce [ Upstream commit ff78538e07fa284ce08cbbcb0730daa91ed16722 ] Programs using poll() on /dev/vcsa to be notified when VT changes occur were missing one case: the switch from gfx to text mode. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ff78538e07fa284ce08cbbcb0730daa91ed16722 ]

Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: usb: qmi_wwan: add SIMCom 8230C composition 2025-07-17T16:25:05+00:00 Xiaowei Li xiaowei.li@simcom.com 2025-06-20T02:27:02+00:00 1987e681eadcfdbe00fc79ec52deab1095f72ccf [ Upstream commit 0b39b055b5b48cbbdf5746a1ca6e3f6b0221e537 ] Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0b39b055b5b48cbbdf5746a1ca6e3f6b0221e537 ]

Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet
T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9071 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
atm: idt77252: Add missing `dma_map_error()` 2025-07-17T16:25:05+00:00 Thomas Fourier fourier.thomas@gmail.com 2025-06-24T06:41:47+00:00 553017c66efcf2af880065cbb1cb786341dc4c22 [ Upstream commit c4890963350dcf4e9a909bae23665921fba4ad27 ] The DMA map functions can fail and should be tested for errors. Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250624064148.12815-3-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c4890963350dcf4e9a909bae23665921fba4ad27 ]

The DMA map functions can fail and should be tested for errors.

Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624064148.12815-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT 2025-07-17T16:25:05+00:00 Somnath Kotur somnath.kotur@broadcom.com 2025-07-10T21:39:38+00:00 e260f4d49370c85a4701d43c6d16b8c39f8b605f [ Upstream commit 3cdf199d4755d477972ee87110b2aebc88b3cfad ] When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3cdf199d4755d477972ee87110b2aebc88b3cfad ]

When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0.  This bug triggers this warning
on a system with IOMMU enabled:

WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]

Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>