linux-stable.git, branch v5.4.124

Linux 5.4.124

2021-06-03T06:59:17+00:00

Link: https://lore.kernel.org/r/20210531130647.887605866@linuxfoundation.org
Tested-by: Hulk Robot 、
Tested-by: Florian Fainelli 
Tested-by: Jason Self 
Tested-by: Linux Kernel Functional Testing 
Tested-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

usb: core: reduce power-on-good delay time of root hub

2021-06-03T06:59:16+00:00

commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.

Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.

Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub

Acked-by: Alan Stern 
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

neighbour: Prevent Race condition in neighbour subsytem

2021-06-03T06:59:16+00:00

commit eefb45eef5c4c425e87667af8f5e904fbdd47abf upstream.

Following Race Condition was detected:

: Executing: __netif_receive_skb() ->__netif_receive_skb_core()
-> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which
takes a reference on neighbour entry 'n'.
Moves further along, arp_process() and calls neigh_update()->
__neigh_update(). Neighbour entry is unlocked just before a call to
neigh_update_gc_list.

This unlocking paves way for another thread that may take a reference on
the same and mark it dead and remove it from gc_list.

 - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead. Also n will be
removed from gc_list.
Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t1,
'n' couldn't be destroyed.

- Code hits neigh_update_gc_list, with neighbour entry
set as dead.

 - arp_process() finally calls neigh_release(n), destroying
the neighbour entry and we have a destroyed ntry still part of gc_list.

Fixes: eb4e8fac00d1("neighbour: Prevent a dead entry from updating gc_list")
Signed-off-by: Chinmay Agarwal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: hso: bail out on interrupt URB allocation failure

2021-06-03T06:59:16+00:00

commit 4d52ebc7ace491d58f96d1f4a1cb9070c506b2e7 upstream.

Commit 31db0dbd7244 ("net: hso: check for allocation failure in
hso_create_bulk_serial_device()") recently started returning an error
when the driver fails to allocate resources for the interrupt endpoint
and tiocmget functionality.

For consistency let's bail out from probe also if the URB allocation
fails.

Signed-off-by: Johan Hovold 
Reviewed-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""

2021-06-03T06:59:16+00:00

commit 27b57bb76a897be80494ee11ee4e85326d19383d upstream.

This reverts commit 4667a6fc1777ce071504bab570d3599107f4790f.

Takashi writes:
	I have already started working on the bigger cleanup of this driver
	code based on 5.13-rc1, so could you drop this revert?

I missed our previous discussion about this, my fault for applying it.

Reported-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

net: hns3: check the return of skb_checksum_help()

2021-06-03T06:59:16+00:00

commit 9bb5a495424fd4bfa672eb1f31481248562fa156 upstream.

Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.

So adds checking for the return of skb_checksum_help().

Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin 
Signed-off-by: Huazhong Tan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

drivers/net/ethernet: clean up unused assignments

2021-06-03T06:59:16+00:00

commit 7c8c0291f84027558bd5fca5729cbcf288c510f4 upstream.

As part of the W=1 compliation series, these lines all created
warnings about unused variables that were assigned a value. Most
of them are from register reads, but some are just picking up
a return value from a function and never doing anything with it.

Fixed warnings:
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs '
.../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
.../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
.../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable]
.../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable]
.../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable]
.../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]

The register reads should be OK, because the current
implementation of readl and friends will always execute even
without an lvalue.

When it makes sense, just remove the lvalue assignment and the
local. Other times, just remove the offending code, and
occasionally, just mark the variable as maybe unused since it
could be used in an ifdef or debug scenario.

Only compile tested with W=1.

Signed-off-by: Jesse Brandeburg 
Acked-by: Edward Cree 
Signed-off-by: David S. Miller 
[fixes gcc-11 build warnings - gregkh]
Signed-off-by: Greg Kroah-Hartman

i915: fix build warning in intel_dp_get_link_status()

2021-06-03T06:59:16+00:00

There is a build warning using gcc-11 showing a mis-match in the .h and .c
definitions of intel_dp_get_link_status():
  CC [M]  drivers/gpu/drm/i915/display/intel_dp.o
drivers/gpu/drm/i915/display/intel_dp.c:4139:56: warning: argument 2 of type ‘u8[6]’ {aka ‘unsigned char[6]’} with mismatched bound [-Warray-parameter=]
 4139 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STATUS_SIZE])
      |                                                     ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/display/intel_dp.c:51:
drivers/gpu/drm/i915/display/intel_dp.h:105:57: note: previously declared as ‘u8 *’ {aka ‘unsigned char *’}
  105 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status);
      |                                                     ~~~~^~~~~~~~~~~

This was fixed accidentally commit b30edfd8d0b4 ("drm/i915: Switch to LTTPR
non-transparent mode link training") by getting rid of the function entirely,
but that is not a viable backport for a stable kernel, so just fix up the
function definition to remove the build warning entirely.  There is no
functional change for this, and it fixes up one of the last 'make allmodconfig'
build warnings when using gcc-11 on this kernel tree.

Signed-off-by: Greg Kroah-Hartman

drm/i915/display: fix compiler warning about array overrun

2021-06-03T06:59:16+00:00

commit fec4d42724a1bf3dcba52307e55375fdb967b852 upstream.

intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().

End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer.  gcc-11 correctly warns
about this case:

  drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
   3491 |                     !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
        |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
  In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
  include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
   1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
        |      ^~~~~~~~~~~~~~~~~~~~
       6:14 elapsed

This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.

There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.

Cc: Jani Nikula 
Cc: Ville Syrjälä 
Cc: Joonas Lahtinen 
Cc: Rodrigo Vivi 
Cc: Daniel Vetter 
Cc: Dave Airlie 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c

2021-06-03T06:59:16+00:00

[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.

ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!

Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap 
Cc: Guenter Roeck 
Cc: Wim Van Sebroeck 
Cc: John Crispin 
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin