linux-stable.git, branch v4.7.7

Linux 4.7.7

2016-10-07T13:22:05+00:00

ALSA: hda - Add the top speaker pin config for HP Spectre x360

2016-10-07T13:21:28+00:00

commit 0eec880966e77bdbee0112989a2be67d92e39929 upstream.

HP Spectre x360 with CX20724 codec has two speaker outputs while the
BIOS sets up only the bottom one (NID 0x17) and disables the top one
(NID 0x1d).

This patch adds a fixup simply defining the proper pincfg for NID 0x1d
so that the top speaker works as is.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169071
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Fix headset mic detection problem for several Dell laptops

2016-10-07T13:21:28+00:00

commit 3f640970a41429f0a076c01270bbd014c9eae61c upstream.

One of the laptops has the codec ALC256 on it, applying the
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem, the rest
of laptops have the codec ALC295 on them, they are similar to machines
with ALC225, applying the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE can fix
the problem.

Signed-off-by: Hui Wang 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Adding one more ALC255 pin definition for headset problem

2016-10-07T13:21:28+00:00

commit 392c9da24a994f238c5d7ea611c6245be4617014 upstream.

We have two new Dell laptop models, they have the same ALC255 pin
definition, but not in the pin quirk table yet, as a result, the
headset microphone can't work. After adding the definition in the
table, the headset microphone works well.

Signed-off-by: Hui Wang 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

Revert "usbtmc: convert to devm_kzalloc"

2016-10-07T13:21:28+00:00

commit ab21b63e8aedfc73565dd9cdd51eb338341177cb upstream.

This reverts commit e6c7efdcb76f11b04e3d3f71c8d764ab75c9423b.

Turns out it was totally wrong.  The memory is supposed to be bound to
the kref, as the original code was doing correctly, not the
device/driver binding as the devm_kzalloc() would cause.

This fixes an oops when read would be called after the device was
unbound from the driver.

Reported-by: Ladislav Michl 
Cc: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: Add ID for a Juniper console

2016-10-07T13:21:28+00:00

commit decc5360f23e9efe0252094f47f57f254dcbb3a9 upstream.

Signed-off-by: Kyle Jones 
Signed-off-by: Greg Kroah-Hartman

usb: usbip: vudc: fix left shift overflow

2016-10-07T13:21:28+00:00

commit 238b7bd91b16d5a08326f858db42229b212e53d8 upstream.

In v_recv_cmd_submit(), urb_p->urb->pipe has the type unsigned int
(which is 32-bit long on x86_64) but 11<<30 results in a 34-bit integer.
Therefore the 2 leading bits are truncated and

    urb_p->urb->pipe &= ~(11 << 30);

has the same meaning as

    urb_p->urb->pipe &= ~(3 << 30);

This second statement seems to be how the code was intended to be
written, as PIPE_ constants have values between 0 and 3.

The overflow has been detected with a clang warning:

    drivers/usb/usbip/vudc_rx.c:145:27: warning: signed shift result
    (0x2C0000000) requires 35 bits to represent, but 'int' only has 32
    bits [-Wshift-overflow]
            urb_p->urb->pipe &= ~(11 << 30);
                                  ~~ ^  ~~

Fixes: 79c02cb1fd5c ("usbip: vudc: Add vudc_rx")
Signed-off-by: Nicolas Iooss 
Signed-off-by: Greg Kroah-Hartman

Staging: fbtft: Fix bug in fbtft-core

2016-10-07T13:21:27+00:00

commit fc1e2c8ea85e109acf09e74789e9b852f6eed251 upstream.

Commit 367e8560e8d7a62d96e9b1d644028a3816e04206 introduced a bug
in fbtft-core where fps is always 0, this is because variable
update_time is not assigned correctly.

Signed-off-by: Ksenija Stanojevic 
Fixes: 367e8560e8d7 ("Staging: fbtbt: Replace timespec with ktime_t")
Signed-off-by: Greg Kroah-Hartman

usb: misc: legousbtower: Fix NULL pointer deference

2016-10-07T13:21:27+00:00

commit 2fae9e5a7babada041e2e161699ade2447a01989 upstream.

This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.

The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.

This bug has existed since 2003. Patch tested by emulated device.

Reported-by: James Patrick-Evans 
Tested-by: James Patrick-Evans 
Signed-off-by: James Patrick-Evans 
Signed-off-by: Greg Kroah-Hartman

dm log writes: fix bug with too large bios

2016-10-07T13:21:27+00:00

commit 7efb367320f56fc4d549875b6f3a6940018ef2e5 upstream.

bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries.  However, the incoming bio may have more vector entries if it
was allocated by other means.  For example, bcache submits bios with
more than BIO_MAX_PAGES entries.  This results in bio_alloc() failure.

To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries.  If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.

Signed-off-by: Mikulas Patocka 
Reviewed-by: Josef Bacik 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman