linux-stable.git, branch v4.4.70 Linux kernel stable tree Linux 4.4.70 2017-05-25T12:50:50+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-05-25T12:50:50+00:00 b409ba3b053501181d47a35769fe61823da012e9 






drivers: char: mem: Check for address space wraparound with mmap()
2017-05-25T12:30:18+00:00

Julius Werner
jwerner@chromium.org

2017-05-12T21:42:58+00:00

837bfdb41337fc6b82dbde4b2ec3ce923845049f

commit b299cde245b0b76c977f4291162cf668e087b408 upstream.

/dev/mem currently allows mmap() mappings that wrap around the end of
the physical address space, which should probably be illegal. It
circumvents the existing STRICT_DEVMEM permission check because the loop
immediately terminates (as the start address is already higher than the
end address). On the x86_64 architecture it will then cause a panic
(from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()).

This patch adds an explicit check to make sure offset + size will not
wrap around in the physical address type.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit b299cde245b0b76c977f4291162cf668e087b408 upstream.

/dev/mem currently allows mmap() mappings that wrap around the end of
the physical address space, which should probably be illegal. It
circumvents the existing STRICT_DEVMEM permission check because the loop
immediately terminates (as the start address is already higher than the
end address). On the x86_64 architecture it will then cause a panic
(from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()).

This patch adds an explicit check to make sure offset + size will not
wrap around in the physical address type.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








nfsd: encoders mustn't use unitialized values in error cases
2017-05-25T12:30:18+00:00

J. Bruce Fields
bfields@redhat.com

2017-05-05T20:17:57+00:00

52cf24769487de7100d824e8c12ecc310de841d7

commit f961e3f2acae94b727380c0b74e2d3954d0edf79 upstream.

In error cases, lgp->lg_layout_type may be out of bounds; so we
shouldn't be using it until after the check of nfserr.

This was seen to crash nfsd threads when the server receives a LAYOUTGET
request with a large layout type.

GETDEVICEINFO has the same problem.

Reported-by: Ari Kauppi <Ari.Kauppi@synopsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit f961e3f2acae94b727380c0b74e2d3954d0edf79 upstream.

In error cases, lgp->lg_layout_type may be out of bounds; so we
shouldn't be using it until after the check of nfserr.

This was seen to crash nfsd threads when the server receives a LAYOUTGET
request with a large layout type.

GETDEVICEINFO has the same problem.

Reported-by: Ari Kauppi <Ari.Kauppi@synopsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
2017-05-25T12:30:17+00:00

Mario Kleiner
mario.kleiner.de@gmail.com

2017-04-21T15:05:08+00:00

da922dc48dcf0d4412905c4856a36aa0147699ed

commit e345da82bd6bdfa8492f80b3ce4370acfd868d95 upstream.

The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc,
as advertised by the Laptops product specs and verified via
injecting a fixed edid + photometer measurements, but edid
reports unknown depth, so drivers fall back to 6 bpc.

Add a quirk to get the full 10 bpc.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit e345da82bd6bdfa8492f80b3ce4370acfd868d95 upstream.

The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc,
as advertised by the Laptops product specs and verified via
injecting a fixed edid + photometer measurements, but edid
reports unknown depth, so drivers fall back to 6 bpc.

Add a quirk to get the full 10 bpc.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








PCI: Freeze PME scan before suspending devices
2017-05-25T12:30:17+00:00

Lukas Wunner
lukas@wunner.de

2017-04-18T18:44:30+00:00

bc428e94070e13ac25b2c7c59a52959af6c904ee

commit ea00353f36b64375518662a8ad15e39218a1f324 upstream.

Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790)
crashes during suspend tests.  Geert Uytterhoeven managed to reproduce the
issue on an M2-W Koelsch board (r8a7791):

  It occurs when the PME scan runs, once per second.  During PME scan, the
  PCI host bridge (rcar-pci) registers are accessed while its module clock
  has already been disabled, leading to the crash.

One reproducer is to configure s2ram to use "s2idle" instead of "deep"
suspend:

  # echo 0 > /sys/module/printk/parameters/console_suspend
  # echo s2idle > /sys/power/mem_sleep
  # echo mem > /sys/power/state

Another reproducer is to write either "platform" or "processors" to
/sys/power/pm_test.  It does not (or is less likely) to happen during full
system suspend ("core" or "none") because system suspend also disables
timers, and thus the workqueue handling PME scans no longer runs.  Geert
believes the issue may still happen in the small window between disabling
module clocks and disabling timers:

  # echo 0 > /sys/module/printk/parameters/console_suspend
  # echo platform > /sys/power/pm_test    # Or "processors"
  # echo mem > /sys/power/state

(Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.)

Rafael Wysocki agrees that PME scans should be suspended before the host
bridge registers become inaccessible.  To that end, queue the task on a
workqueue that gets frozen before devices suspend.

Rafael notes however that as a result, some wakeup events may be missed if
they are delivered via PME from a device without working IRQ (which hence
must be polled) and occur after the workqueue has been frozen.  If that
turns out to be an issue in practice, it may be possible to solve it by
calling pci_pme_list_scan() once directly from one of the host bridge's
pm_ops callbacks.

Stacktrace for posterity:

  PM: Syncing filesystems ... [   38.566237] done.
  PM: Preparing system for sleep (mem)
  Freezing user space processes ... [   38.579813] (elapsed 0.001 seconds) done.
  Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  PM: Suspending system (mem)
  PM: suspend of devices complete after 152.456 msecs
  PM: late suspend of devices complete after 2.809 msecs
  PM: noirq suspend of devices complete after 29.863 msecs
  suspend debug: Waiting for 5 second(s).
  Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
  pgd = c0003000
  [00000000] *pgd=80000040004003, *pmd=00000000
  Internal error: : 1211 [#1] SMP ARM
  Modules linked in:
  CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted
  4.9.0-rc1-koelsch-00011-g68db9bc814362e7f #3383
  Hardware name: Generic R8A7791 (Flattened Device Tree)
  Workqueue: events pci_pme_list_scan
  task: eb56e140 task.stack: eb58e000
  PC is at pci_generic_config_read+0x64/0x6c
  LR is at rcar_pci_cfg_base+0x64/0x84
  pc : [<c041d7b4>]    lr : [<c04309a0>]    psr: 600d0093
  sp : eb58fe98  ip : c041d750  fp : 00000008
  r10: c0e2283c  r9 : 00000000  r8 : 600d0013
  r7 : 00000008  r6 : eb58fed6  r5 : 00000002  r4 : eb58feb4
  r3 : 00000000  r2 : 00000044  r1 : 00000008  r0 : 00000000
  Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5387d  Table: 6a9f6c80  DAC: 55555555
  Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210)
  Stack: (0xeb58fe98 to 0xeb590000)
  fe80:                                                       00000002 00000044
  fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000
  fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830
  fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc
  ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100
  ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000
  ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380
  ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000
  ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0
  ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000
  ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd
  [<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>]
  (pci_bus_read_config_word+0x58/0x80)
  [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>]
  (pci_check_pme_status+0x34/0x78)
  [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54)
  [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4)
  [<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>]
  (process_one_work+0x1bc/0x308)
  [<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0)
  [<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc)
  [<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c)
  Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000)
  ---[ end trace 667d43ba3aa9e589 ]---

Fixes: df17e62e5bff ("PCI: Add support for polling PME state on suspended legacy PCI devices")
Reported-and-tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit ea00353f36b64375518662a8ad15e39218a1f324 upstream.

Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790)
crashes during suspend tests.  Geert Uytterhoeven managed to reproduce the
issue on an M2-W Koelsch board (r8a7791):

  It occurs when the PME scan runs, once per second.  During PME scan, the
  PCI host bridge (rcar-pci) registers are accessed while its module clock
  has already been disabled, leading to the crash.

One reproducer is to configure s2ram to use "s2idle" instead of "deep"
suspend:

  # echo 0 > /sys/module/printk/parameters/console_suspend
  # echo s2idle > /sys/power/mem_sleep
  # echo mem > /sys/power/state

Another reproducer is to write either "platform" or "processors" to
/sys/power/pm_test.  It does not (or is less likely) to happen during full
system suspend ("core" or "none") because system suspend also disables
timers, and thus the workqueue handling PME scans no longer runs.  Geert
believes the issue may still happen in the small window between disabling
module clocks and disabling timers:

  # echo 0 > /sys/module/printk/parameters/console_suspend
  # echo platform > /sys/power/pm_test    # Or "processors"
  # echo mem > /sys/power/state

(Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.)

Rafael Wysocki agrees that PME scans should be suspended before the host
bridge registers become inaccessible.  To that end, queue the task on a
workqueue that gets frozen before devices suspend.

Rafael notes however that as a result, some wakeup events may be missed if
they are delivered via PME from a device without working IRQ (which hence
must be polled) and occur after the workqueue has been frozen.  If that
turns out to be an issue in practice, it may be possible to solve it by
calling pci_pme_list_scan() once directly from one of the host bridge's
pm_ops callbacks.

Stacktrace for posterity:

  PM: Syncing filesystems ... [   38.566237] done.
  PM: Preparing system for sleep (mem)
  Freezing user space processes ... [   38.579813] (elapsed 0.001 seconds) done.
  Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  PM: Suspending system (mem)
  PM: suspend of devices complete after 152.456 msecs
  PM: late suspend of devices complete after 2.809 msecs
  PM: noirq suspend of devices complete after 29.863 msecs
  suspend debug: Waiting for 5 second(s).
  Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
  pgd = c0003000
  [00000000] *pgd=80000040004003, *pmd=00000000
  Internal error: : 1211 [#1] SMP ARM
  Modules linked in:
  CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted
  4.9.0-rc1-koelsch-00011-g68db9bc814362e7f #3383
  Hardware name: Generic R8A7791 (Flattened Device Tree)
  Workqueue: events pci_pme_list_scan
  task: eb56e140 task.stack: eb58e000
  PC is at pci_generic_config_read+0x64/0x6c
  LR is at rcar_pci_cfg_base+0x64/0x84
  pc : [<c041d7b4>]    lr : [<c04309a0>]    psr: 600d0093
  sp : eb58fe98  ip : c041d750  fp : 00000008
  r10: c0e2283c  r9 : 00000000  r8 : 600d0013
  r7 : 00000008  r6 : eb58fed6  r5 : 00000002  r4 : eb58feb4
  r3 : 00000000  r2 : 00000044  r1 : 00000008  r0 : 00000000
  Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5387d  Table: 6a9f6c80  DAC: 55555555
  Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210)
  Stack: (0xeb58fe98 to 0xeb590000)
  fe80:                                                       00000002 00000044
  fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000
  fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830
  fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc
  ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100
  ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000
  ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380
  ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000
  ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0
  ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000
  ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd
  [<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>]
  (pci_bus_read_config_word+0x58/0x80)
  [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>]
  (pci_check_pme_status+0x34/0x78)
  [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54)
  [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4)
  [<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>]
  (process_one_work+0x1bc/0x308)
  [<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0)
  [<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc)
  [<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c)
  Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000)
  ---[ end trace 667d43ba3aa9e589 ]---

Fixes: df17e62e5bff ("PCI: Add support for polling PME state on suspended legacy PCI devices")
Reported-and-tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
2017-05-25T12:30:17+00:00

David Woodhouse
dwmw@amazon.co.uk

2017-04-12T12:25:50+00:00

5f36c8b4e4a336fdf797d1e4a59a429f541befdf

commit 6bccc7f426abd640f08d8c75fb22f99483f201b4 upstream.

In the PCI_MMAP_PROCFS case when the address being passed by the user is a
'user visible' resource address based on the bus window, and not the actual
contents of the resource, that's what we need to be checking it against.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 6bccc7f426abd640f08d8c75fb22f99483f201b4 upstream.

In the PCI_MMAP_PROCFS case when the address being passed by the user is a
'user visible' resource address based on the bus window, and not the actual
contents of the resource, that's what we need to be checking it against.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








tracing/kprobes: Enforce kprobes teardown after testing
2017-05-25T12:30:17+00:00

Thomas Gleixner
tglx@linutronix.de

2017-05-17T08:19:49+00:00

6384f782a69cf93a8a59322e1b6cf29f27fa0c8f

commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








osf_wait4(): fix infoleak
2017-05-25T12:30:17+00:00

Al Viro
viro@zeniv.linux.org.uk

2017-05-15T01:47:25+00:00

d5fb96b955ff53e31f8d83553e28510a6e5cb90b

commit a8c39544a6eb2093c04afd5005b6192bd0e880c6 upstream.

failing sys_wait4() won't fill struct rusage...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit a8c39544a6eb2093c04afd5005b6192bd0e880c6 upstream.

failing sys_wait4() won't fill struct rusage...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








genirq: Fix chained interrupt data ordering
2017-05-25T12:30:17+00:00

Thomas Gleixner
tglx@linutronix.de

2017-05-11T11:54:11+00:00

e07db0d720d37678976956a5f972828fa6dca5a9

commit 2c4569ca26986d18243f282dd727da27e9adae4c upstream.

irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.

That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.

Cure it by storing handler data before installing the chained handler.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 2c4569ca26986d18243f282dd727da27e9adae4c upstream.

irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.

That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.

Cure it by storing handler data before installing the chained handler.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>








uwb: fix device quirk on big-endian hosts
2017-05-25T12:30:17+00:00

Johan Hovold
johan@kernel.org

2017-05-12T10:06:32+00:00

1736f2b3de6295a3ba9965731e64b50ecdad50a7

commit 41318a2b82f5d5fe1fb408f6d6e0b22aa557111d upstream.

Add missing endianness conversion when using the USB device-descriptor
idProduct field to apply a hardware quirk.

Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>






commit 41318a2b82f5d5fe1fb408f6d6e0b22aa557111d upstream.

Add missing endianness conversion when using the USB device-descriptor
idProduct field to apply a hardware quirk.

Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>