linux-stable.git, branch v4.4.282

Linux 4.4.282

2021-08-26T13:19:05+00:00

Tested-by: Pavel Machek (CIP) 
Tested-by: Linux Kernel Functional Testing 
Tested-by: Guenter Roeck 
Tested-by: Shuah Khan 
Signed-off-by: Sasha Levin

mmc: dw_mmc: Fix occasional hang after tuning on eMMC

2021-08-26T12:37:55+00:00

[ Upstream commit ba2d139b02ba684c6c101de42fed782d6cd2b997 ]

In commit 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after
response errors.") we fixed a tuning-induced hang that I saw when
stress testing tuning on certain SD cards.  I won't re-hash that whole
commit, but the summary is that as a normal part of tuning you need to
deal with transfer errors and there were cases where these transfer
errors was putting my system into a bad state causing all future
transfers to fail.  That commit fixed handling of the transfer errors
for me.

In downstream Chrome OS my fix landed and had the same behavior for
all SD/MMC commands.  However, it looks like when the commit landed
upstream we limited it to only SD tuning commands.  Presumably this
was to try to get around problems that Alim Akhtar reported on exynos
[1].

Unfortunately while stress testing reboots (and suspend/resume) on
some rk3288-based Chromebooks I found the same problem on the eMMC on
some of my Chromebooks (the ones with Hynix eMMC).  Since the eMMC
tuning command is different (MMC_SEND_TUNING_BLOCK_HS200
vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the
same situation.

I'm hoping that whatever problems exynos was having in the past are
somehow magically fixed now and we can make the behavior the same for
all commands.

[1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com

Fixes: 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.")
Signed-off-by: Douglas Anderson 
Cc: Marek Szyprowski 
Cc: Alim Akhtar 
Cc: Enric Balletbo i Serra 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin

ASoC: intel: atom: Fix breakage for PCM buffer address setup

2021-08-26T12:37:54+00:00

[ Upstream commit 65ca89c2b12cca0d473f3dd54267568ad3af55cc ]

The commit 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM
buffer address") changed the reference of PCM buffer address to
substream->runtime->dma_addr as the buffer address may change
dynamically.  However, I forgot that the dma_addr field is still not
set up for the CONTINUOUS buffer type (that this driver uses) yet in
5.14 and earlier kernels, and it resulted in garbage I/O.  The problem
will be fixed in 5.15, but we need to address it quickly for now.

The fix is to deduce the address again from the DMA pointer with
virt_to_phys(), but from the right one, substream->runtime->dma_area.

Fixes: 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM buffer address")
Reported-and-tested-by: Hans de Goede 
Cc: 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/2048c6aa-2187-46bd-6772-36a4fb3c5aeb@redhat.com
Link: https://lore.kernel.org/r/20210819152945.8510-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ipack: tpci200: fix many double free issues in tpci200_pci_probe

2021-08-26T12:37:54+00:00

[ Upstream commit 57a1681095f912239c7fb4d66683ab0425973838 ]

The function tpci200_register called by tpci200_install and
tpci200_unregister called by tpci200_uninstall are in pair. However,
tpci200_unregister has some cleanup operations not in the
tpci200_register. So the error handling code of tpci200_pci_probe has
many different double free issues.

Fix this problem by moving those cleanup operations out of
tpci200_unregister, into tpci200_pci_remove and reverting
the previous commit 9272e5d0028d ("ipack/carriers/tpci200:
Fix a double free in tpci200_pci_probe").

Fixes: 9272e5d0028d ("ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe")
Cc: stable@vger.kernel.org
Reported-by: Dongliang Mu 
Signed-off-by: Dongliang Mu 
Link: https://lore.kernel.org/r/20210810100323.3938492-1-mudongliangabcd@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

ALSA: hda - fix the 'Capture Switch' value change notifications

2021-08-26T12:37:54+00:00

[ Upstream commit a2befe9380dd04ee76c871568deca00eedf89134 ]

The original code in the cap_put_caller() function does not
handle correctly the positive values returned from the passed
function for multiple iterations. It means that the change
notifications may be lost.

Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213851
Cc: 
Signed-off-by: Jaroslav Kysela 
Link: https://lore.kernel.org/r/20210811161441.1325250-1-perex@perex.cz
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

mmc: dw_mmc: Fix hang on data CRC error

2021-08-26T12:37:52+00:00

[ Upstream commit 25f8203b4be1937c4939bb98623e67dcfd7da4d1 ]

When a Data CRC interrupt is received, the driver disables the DMA, then
sends the stop/abort command and then waits for Data Transfer Over.

However, sometimes, when a data CRC error is received in the middle of a
multi-block write transfer, the Data Transfer Over interrupt is never
received, and the driver hangs and never completes the request.

The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
"before assertion of SWR".  Do these operations in the recommended
order.  With this change the Data Transfer Over is always received
correctly in my tests.

Signed-off-by: Vincent Whitchurch 
Reviewed-by: Jaehoon Chung 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210630102232.16011-1-vincent.whitchurch@axis.com
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin

mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default

2021-08-26T12:37:52+00:00

[ Upstream commit e13c3c081845b51e8ba71a90e91c52679cfdbf89 ]

stop_cmdr should be set to values relevant to stop command.
It migth be assigned to values whatever there is mrq->stop or not.
Then it doesn't need to use dw_mci_prepare_command().
It's enough to use the prep_stop_abort for preparing stop command.

Signed-off-by: Jaehoon Chung 
Tested-by: Heiko Stuebner 
Reviewed-by: Shawn Lin 
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin

mmc: dw_mmc: Wait for data transfer after response errors.

2021-08-26T12:37:51+00:00

[ Upstream commit 46d179525a1f6d16957dcb4624517bc04142b3e7 ]

According to the DesignWare state machine description, after we get a
"response error" or "response CRC error" we move into data transfer
mode. That means that we don't necessarily need to special case
trying to deal with the failure right away. We can wait until we are
notified that the data transfer is complete (with or without errors)
and then we can deal with the failure.

It may sound strange to defer dealing with a command that we know will
fail anyway, but this appears to fix a bug. During tuning (CMD19) on
a specific card on an rk3288-based system, we found that we could get
a "response CRC error". Sending the stop command after the "response
CRC error" would then throw the system into a confused state causing
all future tuning phases to report failure.

When in the confused state, the controller would show these (hex codes
are interrupt status register):
 CMD ERR: 0x00000046 (cmd=19)
 CMD ERR: 0x0000004e (cmd=12)
 DATA ERR: 0x00000208
 DATA ERR: 0x0000020c
 CMD ERR: 0x00000104 (cmd=19)
 CMD ERR: 0x00000104 (cmd=12)
 DATA ERR: 0x00000208
 DATA ERR: 0x0000020c
 ...
 ...

It is inherently difficult to deal with the complexity of trying to
correctly send a stop command while a data transfer is taking place
since you need to deal with different corner cases caused by the fact
that the data transfer could complete (with errors or without errors)
during various places in sending the stop command (dw_mci_stop_dma,
send_stop_abort, etc)

Instead of adding a bunch of extra complexity to deal with this, it
seems much simpler to just use the more straightforward (and less
error-prone) path of letting the data transfer finish. There
shouldn't be any huge benefit to sending the stop command slightly
earlier, anyway.

Signed-off-by: Doug Anderson 
Signed-off-by: Enric Balletbo i Serra 
Cc: Alim Akhtar 
Signed-off-by: Jaehoon Chung 
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin

net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32

2021-08-26T12:37:51+00:00

[ Upstream commit 0a298d133893c72c96e2156ed7cb0f0c4a306a3e ]

qlcnic_83xx_unlock_flash() is called on all paths after we call
qlcnic_83xx_lock_flash(), except for one error path on failure
of QLCRD32(), which may cause a deadlock. This bug is suggested
by a static analysis tool, please advise.

Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery")
Signed-off-by: Dinghao Liu 
Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: 6pack: fix slab-out-of-bounds in decode_data

2021-08-26T12:37:51+00:00

[ Upstream commit 19d1532a187669ce86d5a2696eb7275310070793 ]

Syzbot reported slab-out-of bounds write in decode_data().
The problem was in missing validation checks.

Syzbot's reproducer generated malicious input, which caused
decode_data() to be called a lot in sixpack_decode(). Since
rx_count_cooked is only 400 bytes and noone reported before,
that 400 bytes is not enough, let's just check if input is malicious
and complain about buffer overrun.

Fail log:
==================================================================
BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843
Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7

CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0
...
Workqueue: events_unbound flush_to_ldisc
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137
 decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843
 decode_data drivers/net/hamradio/6pack.c:965 [inline]
 sixpack_decode drivers/net/hamradio/6pack.c:968 [inline]

Reported-and-tested-by: syzbot+fc8cd9a673d4577fb2e4@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin 
Reviewed-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin