linux-stable.git, branch v4.19.86

Linux 4.19.86

2019-11-24T07:21:09+00:00

x86/resctrl: Fix rdt_find_domain() return value and checks

2019-11-24T07:21:09+00:00

[ Upstream commit 52eb74339a6233c69f4e3794b69ea7c98eeeae1b ]

rdt_find_domain() returns an ERR_PTR() that is generated from a provided
domain id when the value is negative.

Care needs to be taken when creating an ERR_PTR() from this value
because a subsequent check using IS_ERR() expects the error to
be within the MAX_ERRNO range. Using an invalid domain id as an
ERR_PTR() does work at this time since this is currently always -1.
Using this undocumented assumption is fragile since future users of
rdt_find_domain() may not be aware of thus assumption.

Two related issues are addressed:

- Ensure that rdt_find_domain() always returns a valid error value by
forcing the error to be -ENODEV when a negative domain id is provided.

- In a few instances the return value of rdt_find_domain() is just
checked for NULL - fix these to include a check of ERR_PTR.

Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Fixes: 521348b011d6 ("x86/intel_rdt: Introduce utility to obtain CDP peer")
Signed-off-by: Reinette Chatre 
Signed-off-by: Borislav Petkov 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: fenghua.yu@intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: x86-ml 
Link: https://lkml.kernel.org/r/b88cd4ff6a75995bf8db9b0ea546908fe50f69f3.1544479852.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin

mmc: tmio: fix SCC error handling to avoid false positive CRC error

2019-11-24T07:21:08+00:00

[ Upstream commit 51b72656bb39fdcb8f3174f4007bcc83ad1d275f ]

If an SCC error occurs during a read/write command execution, a false
positive CRC error message is output.

mmcblk0: response CRC error sending r/w cmd command, card status 0x900

check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a
correction error in the next (up or down) delay tap position. However,
since the command is successful, only retuning needs to be executed.
This has been confirmed by HW engineers.

Thus, on SCC error, set retuning flag instead of setting an error code.

Fixes: b85fb0a1c8ae ("mmc: tmio: Fix SCC error detection")
Signed-off-by: Takeshi Saito 
[wsa: updated comment and commit message, removed some braces]
Signed-off-by: Wolfram Sang 
Reviewed-by: Simon Horman 
Reviewed-by: Yoshihiro Shimoda 
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Signed-off-by: Sasha Levin

powerpc/time: Fix clockevent_decrementer initalisation for PR KVM

2019-11-24T07:21:08+00:00

[ Upstream commit b4d16ab58c41ff0125822464bdff074cebd0fe47 ]

In the recent commit 8b78fdb045de ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).

We no longer initialise the mult & shift values of
decrementer_clockevent itself.

This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.

For now fix it by assigning back to decrementer_clockevent the mult
and shift values.

Fixes: 8b78fdb045de ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin

tools: PCI: Fix broken pcitest compilation

2019-11-24T07:21:08+00:00

[ Upstream commit 8a5e0af240e07dd3d4897eb8ff52aab757da7fab ]

pcitest is currently broken due to the following compiler error
and related warning. Fix by changing the run_test() function
signature to return an integer result.

pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function
returning void
  return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */

pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
  return run_test(test);

Fixes: fef31ecaaf2c ("tools: PCI: Fix compilation warnings")
Signed-off-by: Alan Mikhak 
Signed-off-by: Lorenzo Pieralisi 
Reviewed-by: Paul Walmsley 
Signed-off-by: Sasha Levin

PM / devfreq: Fix static checker warning in try_then_request_governor

2019-11-24T07:21:07+00:00

[ Upstream commit b53b0128052ffd687797d5f4deeb76327e7b5711 ]

The patch 23c7b54ca1cd: "PM / devfreq: Fix devfreq_add_device() when
drivers are built as modules." leads to the following static checker
warning:

    drivers/devfreq/devfreq.c:1043 governor_store()
    warn: 'governor' can also be NULL

The reason is that the try_then_request_governor() function returns both
error pointers and NULL. It should just return error pointers, so fix
this by returning a ERR_PTR to the error intead of returning NULL.

Fixes: 23c7b54ca1cd ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.")
Reported-by: Dan Carpenter 
Signed-off-by: Enric Balletbo i Serra 
Reviewed-by: Chanwoo Choi 
Signed-off-by: MyungJoo Ham 
Signed-off-by: Sasha Levin

ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate

2019-11-24T07:21:07+00:00

[ Upstream commit c8afd03486c26accdda4846e5561aa3f8e862a9d ]

Commit 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from
resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early
on BYT/CHT as resume_from_noirq is set.

This means that on resume from hibernate dw_i2c_plat_resume() doesn't get
called by the restore_early callback, acpi_lpss_resume_early(). Instead it
should be called by the restore_noirq callback matching how things are done
when resume_from_noirq is set and we are doing a regular resume.

Change the restore_noirq callback to acpi_lpss_resume_noirq so that
dw_i2c_plat_resume() gets properly called when resume_from_noirq is set
and we are resuming from hibernate.

Likewise also change the poweroff_noirq callback so that
dw_i2c_plat_suspend gets called properly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139
Fixes: 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq")
Reported-by: Kai-Heng Feng 
Signed-off-by: Hans de Goede 
Cc: 4.20+  # 4.20+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

tcp: start receiver buffer autotuning sooner

2019-11-24T07:21:06+00:00

[ Upstream commit 041a14d2671573611ffd6412bc16e2f64469f7fb ]

Previously receiver buffer auto-tuning starts after receiving
one advertised window amount of data. After the initial receiver
buffer was raised by patch a337531b942b ("tcp: up initial rmem to
128KB and SYN rwin to around 64KB"), the reciver buffer may take
too long to start raising. To address this issue, this patch lowers
the initial bytes expected to receive roughly the expected sender's
initial window.

Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Yuchung Cheng 
Signed-off-by: Wei Wang 
Signed-off-by: Neal Cardwell 
Signed-off-by: Eric Dumazet 
Reviewed-by: Soheil Hassas Yeganeh 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ARM: dts: omap5: Fix dual-role mode on Super-Speed port

2019-11-24T07:21:06+00:00

[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]

OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.

Without this, Host role will not work correctly.

Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: H. Nikolaus Schaller 
Signed-off-by: Roger Quadros 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

mlxsw: spectrum_switchdev: Check notification relevance based on upper device

2019-11-24T07:21:05+00:00

[ Upstream commit 5050f6ae253ad1307af3486c26fc4f94287078b7 ]

VxLAN FDB updates are sent with the VxLAN device which is not our upper
and will therefore be ignored by current code.

Solve this by checking whether the upper device (bridge) is our upper.

Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin