commit ac8cc241a81941932da44993242e68c62e115ec7 upstream. A single U encoder table can match multiple DCB entries, whereas the reverse is not true and can lead to us not matching a DCB entry at all, and fail to initialise some encoders. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e992c8d9eebc2bd3246252ee5c0422dbbbce7ae upstream. Matches format used by a couple of other vbios tables, useful to have laying around already calculated. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3ed1048715f2edc10c4dda6148b60e93f6282ed upstream. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99d17cfa3bbc6f4edb175f819af59c6b9e245e82 upstream. This patch converts the module to use clk_prepare_enable and clk_disable_unprepare variants as required by common clock framework. Without this the system crash during probe function. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25736e0c8269e9613aa6036fbc591818daa30d14 upstream. This patch let glue driver return -EPROBE_DEFER if the transceiver is not readly, so we can support defer probe on musb to fix the below error on 3.7-rc5 if transceiver drivers are built as module: [ 19.052490] unable to find transceiver of type USB2 PHY [ 19.072052] HS USB OTG: no transceiver configured [ 19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19 [ 19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19 [ 19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430' [ 19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430 [ 19.174407] bus: 'platform': add driver twl4030_usb [ 19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb [ 19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb [ 19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3 [ 19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready [ 19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb' [ 19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 681d1e8761ca773967bce9bd1bb2896f07279551 upstream. In the fail1~fail5 failure path, pm_runtime_disable() should be called to avoid 'Unbalanced pm_runtime_enable' error in next probe() which may be triggered by defer probe or next 'modprobe musb_hdrc'. Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream. The current entry in unusual_cypress.h for the Super TOP SATA bridge devices seems to be causing corruption on newer revisions of this device. This has been reported in Arch Linux and Fedora. The original patch was tested on devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice as 2.20. Limit the UNUSUAL_DEV entry to devices less than 2.20. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591 The Arch Forum post on this is here: https://bbs.archlinux.org/viewtopic.php?id=152011 Reported-by: Carsten S. <carsteniq@yahoo.com> Tested-by: Carsten S. <carsteniq@yahoo.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream. 1. The idProduct is little endian, so make sure its value to be compatible with the current CPU. Make no break on big endian processors. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04753523266629b1cd0518091da1658755787198 upstream. The module alias should be "ehci-omap" and not "omap-ehci" to match the platform device name. The omap-ehci module should now autoload correctly. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>