linux-stable.git, branch v3.4.76

Linux 3.4.76

2014-01-08T17:42:33+00:00

hwmon: (w83l768ng) Fix fan speed control range

2014-01-08T17:42:12+00:00

commit 33a7ab91d509fa33b4bcd3ce0038cc80298050da upstream.

The W83L786NG stores the fan speed on 4 bits while the sysfs interface
uses a 0-255 range. Thus the driver should scale the user input down
to map it to the device range, and scale up the value read from the
device before presenting it to the user. The reserved register nibble
should be left unchanged.

Signed-off-by: Jean Delvare 
Reviewed-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()

2014-01-08T17:42:12+00:00

commit c0828e50485932b7e019df377a6b0a8d1ebd3080 upstream.

Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.

Reported-by: Janak Desai 
Signed-off-by: Paul Moore 
Signed-off-by: Greg Kroah-Hartman

selinux: look for IPsec labels on both inbound and outbound packets

2014-01-08T17:42:12+00:00

commit 817eff718dca4e54d5721211ddde0914428fbb7c upstream.

Previously selinux_skb_peerlbl_sid() would only check for labeled
IPsec security labels on inbound packets, this patch enables it to
check both inbound and outbound traffic for labeled IPsec security
labels.

Reported-by: Janak Desai 
Signed-off-by: Paul Moore 
Signed-off-by: Greg Kroah-Hartman

sh: always link in helper functions extracted from libgcc

2014-01-08T17:42:12+00:00

commit 84ed8a99058e61567f495cc43118344261641c5f upstream.

E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m:

  ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined!

For "lib-y", if no symbols in a compilation unit are referenced by other
units, the compilation unit will not be included in vmlinux.  This
breaks modules that do reference those symbols.

Use "obj-y" instead to fix this.

http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/

This doesn't fix all cases. There are others, e.g. udivsi3.
This is also not limited to sh, many architectures handle this in the
same way.

A simple solution is to unconditionally include all helper functions.
A more complex solution is to make the choice of "lib-y" or "obj-y" depend
on CONFIG_MODULES:

  obj-$(CONFIG_MODULES) += ...
  lib-y($CONFIG_MODULES) += ...

Signed-off-by: Geert Uytterhoeven 
Cc: Paul Mundt 
Tested-by: Nobuhiro Iwamatsu 
Reviewed-by: Nobuhiro Iwamatsu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

sched: Avoid throttle_cfs_rq() racing with period_timer stopping

2014-01-08T17:42:12+00:00

commit f9f9ffc237dd924f048204e8799da74f9ecf40cf upstream.

throttle_cfs_rq() doesn't check to make sure that period_timer is running,
and while update_curr/assign_cfs_runtime does, a concurrently running
period_timer on another cpu could cancel itself between this cpu's
update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running
in the tg to restart the timer, this causes the cfs_rq to be stranded
forever.

Fix this by calling __start_cfs_bandwidth() in throttle if the timer is
inactive.

(Also add some sched_debug lines for cfs_bandwidth.)

Tested: make a run/sleep task in a cgroup, loop switching the cgroup
between 1ms/100ms quota and unlimited, checking for timer_active=0 and
throttled=1 as a failure. With the throttle_cfs_rq() change commented out
this fails, with the full patch it passes.

Signed-off-by: Ben Segall 
Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181632.22647.84174.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Chris J Arges 
Signed-off-by: Greg Kroah-Hartman

gpio: msm: Fix irq mask/unmask by writing bits instead of numbers

2014-01-08T17:42:12+00:00

commit 4cc629b7a20945ce35628179180329b6bc9e552b upstream.

We should be writing bits here but instead we're writing the
numbers that correspond to the bits we want to write. Fix it by
wrapping the numbers in the BIT() macro. This fixes gpios acting
as interrupts.

Signed-off-by: Stephen Boyd 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

jbd2: don't BUG but return ENOSPC if a handle runs out of space

2014-01-08T17:42:12+00:00

commit f6c07cad081ba222d63623d913aafba5586c1d2c upstream.

If a handle runs out of space, we currently stop the kernel with a BUG
in jbd2_journal_dirty_metadata().  This makes it hard to figure out
what might be going on.  So return an error of ENOSPC, so we can let
the file system layer figure out what is going on, to make it more
likely we can get useful debugging information).  This should make it
easier to debug problems such as the one which was reported by:

    https://bugzilla.kernel.org/show_bug.cgi?id=44731

The only two callers of this function are ext4_handle_dirty_metadata()
and ocfs2_journal_dirty().  The ocfs2 function will trigger a
BUG_ON(), which means there will be no change in behavior.  The ext4
function will call ext4_error_inode() which will print the useful
debugging information and then handle the situation using ext4's error
handling mechanisms (i.e., which might mean halting the kernel or
remounting the file system read-only).

Also, since both file systems already call WARN_ON(), drop the WARN_ON
from jbd2_journal_dirty_metadata() to avoid two stack traces from
being displayed.

Signed-off-by: "Theodore Ts'o" 
Cc: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker 
Signed-off-by: Greg Kroah-Hartman

GFS2: Fix incorrect invalidation for DIO/buffered I/O

2014-01-08T17:42:12+00:00

commit dfd11184d894cd0a92397b25cac18831a1a6a5bc upstream.

In patch 209806aba9d540dde3db0a5ce72307f85f33468f we allowed
local deferred locks to be granted against a cached exclusive
lock. That opened up a corner case which this patch now
fixes.

The solution to the problem is to check whether we have cached
pages each time we do direct I/O and if so to unmap, flush
and invalidate those pages. Since the glock state machine
normally does that for us, mostly the code will be a no-op.

Signed-off-by: Steven Whitehouse 
Signed-off-by: Greg Kroah-Hartman

GFS2: don't hold s_umount over blkdev_put

2014-01-08T17:42:12+00:00

commit dfe5b9ad83a63180f358b27d1018649a27b394a9 upstream.

This is a GFS2 version of Tejun's patch:
4f331f01b9c43bf001d3ffee578a97a1e0633eac
vfs: don't hold s_umount over close_bdev_exclusive() call

In this case its blkdev_put itself that is the issue and this
patch uses the same solution of dropping and retaking s_umount.

Reported-by: Tejun Heo 
Reported-by: Al Viro 
Signed-off-by: Steven Whitehouse 
Signed-off-by: Greg Kroah-Hartman