linux-stable.git, branch v3.18.87

Linux 3.18.87

2017-12-09T17:29:48+00:00

usb: host: fix incorrect updating of offset

2017-12-09T17:29:48+00:00

commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should
be offset otherwise the loop just reads the same capability value
and loops forever.  Thanks to Alan Stern for pointing out the
correct fix to my original fix.  Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp'
is never read

Fixes: d49d43174400 ("USB: misc ehci updates")
Signed-off-by: Colin Ian King 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: usbfs: Filter flags passed in from user space

2017-12-09T17:29:48+00:00

commit 446f666da9f019ce2ffd03800995487e79a91462 upstream.

USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints.
Improve sanity checking.

Reported-by: Andrey Konovalov 
Signed-off-by: Oliver Neukum 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: devio: Prevent integer overflow in proc_do_submiturb()

2017-12-09T17:29:48+00:00

commit 57999d1107c1e60c2ca7088f2ac0f819e2f554b3 upstream.

There used to be an integer overflow check in proc_do_submiturb() but
we removed it.  It turns out that it's still required.  The
uurb->buffer_length variable is a signed integer and it's controlled by
the user.  It can lead to an integer overflow when we do:

	num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);

If we strip away the macro then that line looks like this:

	num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE;
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It's the first addition which can overflow.

Fixes: 1129d270cbfb ("USB: Increase usbfs transfer limit")
Signed-off-by: Dan Carpenter 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: Increase usbfs transfer limit

2017-12-09T17:29:48+00:00

commit 1129d270cbfbb7e2b1ec3dede4a13930bdd10e41 upstream.

Promote a variable keeping track of USB transfer memory usage to a
wider data type and allow for higher bandwidth transfers from a large
number of USB devices connected to a single host.

Signed-off-by: Mateusz Berezecki 
Signed-off-by: Greg Kroah-Hartman

usb: hub: Cycle HUB power when initialization fails

2017-12-09T17:29:48+00:00

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and
the connection fails. In particular, the device thinks that it's already set up
and running while the host thinks the device still needs to be configured. To
work around this issue, power-cycle the hub's output to issue a sort of "reset"
to the device. This makes the device restart its state machine and then the
initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence
becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc
usb 1-1.3: device not accepting address 18, error -71
usb 1-1.3: new high-speed USB device number 19 using ci_hdrc
usb 1-1.3: device not accepting address 19, error -71
usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc
usb-storage 1-1.3:1.2: USB Mass Storage device detected

Signed-off-by: Mike Looijmans 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Add Amazon PCI serial device ID

2017-12-09T17:29:48+00:00

commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream.

This device will be used in future Amazon EC2 instances as the primary
serial port (i.e., data sent to this port will be available via the
GetConsoleOuput [1] EC2 API).

[1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html

Signed-off-by: Matt Wilson 
Signed-off-by: Greg Kroah-Hartman

usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub

2017-12-09T17:29:48+00:00

commit e43a12f1793ae1fe006e26fe9327a8840a92233c upstream.

KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect
to Realtek r8153.

Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi
USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work.

Signed-off-by: Kai-Heng Feng 
Signed-off-by: Greg Kroah-Hartman

uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices

2017-12-09T17:29:48+00:00

commit 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 upstream.

We've been adding this as a quirk on a per device basis hoping that
newer disk enclosures would do better, but that has not happened,
so simply apply this quirk to all Seagate devices.

Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

ima: fix hash algorithm initialization

2017-12-09T17:29:48+00:00

[ Upstream commit ebe7c0a7be92bbd34c6ff5b55810546a0ee05bee ]

The hash_setup function always sets the hash_setup_done flag, even
when the hash algorithm is invalid.  This prevents the default hash
algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.

This patch sets hash_setup_done flag only for valid hash algorithms.

Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms"
Signed-off-by: Boshi Wang 
Signed-off-by: Mimi Zohar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman