linux-stable.git, branch v3.18.77

Linux 3.18.77

2017-10-21T15:07:27+00:00

Revert "tty: goldfish: Fix a parameter of a call to free_irq"

2017-10-21T15:07:27+00:00

This reverts commit 0961072120f3e40fe98c2bb49c45549ca3f042dc which is
commit 1a5c2d1de7d35f5eb9793266237903348989502b upstream.

Ben writes:
	This fixes a bug introduced in 4.6 by commit 465893e18878 "tty:
	goldfish: support platform_device with id -1".  For earlier
	kernel versions, it *introduces* a bug.

So let's drop it.

Reported-by: Ben Hutchings 
Cc: Christophe JAILLET 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

target/iscsi: Fix unsolicited data seq_end_offset calculation

2017-10-21T15:07:27+00:00

[ Upstream commit 4d65491c269729a1e3b375c45e73213f49103d33 ]

In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.

This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example

Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k

Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct

Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.

Signed-off-by: Varun Prakash 
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche 
Signed-off-by: Nicholas Bellinger 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

uapi: fix linux/mroute6.h userspace compilation errors

2017-10-21T15:07:27+00:00

[ Upstream commit 72aa107df6a275cf03359934ca5799a2be7a1bf7 ]

Include  to fix the following linux/mroute6.h userspace
compilation errors:

/usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type
  struct sockaddr_in6 mf6cc_origin;  /* Origin of mcast */
/usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type
  struct sockaddr_in6 mf6cc_mcastgrp;  /* Group in question */
/usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type
  struct sockaddr_in6 src;
/usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type
  struct sockaddr_in6 grp;
/usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type
  struct in6_addr im6_src, im6_dst;
/usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type
  struct in6_addr im6_src, im6_dst;

Signed-off-by: Dmitry V. Levin 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

uapi: fix linux/rds.h userspace compilation errors

2017-10-21T15:07:26+00:00

[ Upstream commit feb0869d90e51ce8b6fd8a46588465b1b5a26d09 ]

Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:

/usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t'
  uint8_t name[32];
/usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t'
  uint64_t value;
/usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t'
  uint64_t next_tx_seq;
/usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t'
  uint64_t next_rx_seq;
/usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t'
  uint8_t transport[TRANSNAMSIZ];  /* null term ascii */
/usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t'
  uint64_t seq;
/usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t'
  uint32_t len;
/usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t'
  uint32_t sndbuf;
/usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t'
  uint32_t rcvbuf;
/usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t'
  uint64_t inum;
/usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t'
  uint64_t       hdr_rem;
/usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t'
  uint64_t       data_rem;
/usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t'
  uint32_t       last_sent_nxt;
/usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t'
  uint32_t       last_expected_una;
/usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t'
  uint32_t       last_seen_una;
/usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t'
  uint8_t  src_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t'
  uint8_t  dst_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t'
  uint32_t max_send_wr;
/usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t'
  uint32_t max_recv_wr;
/usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t'
  uint32_t max_send_sge;
/usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_max;
/usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_size;
/usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t'
 typedef uint64_t rds_rdma_cookie_t;
/usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t'
  uint64_t addr;
/usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t'
  uint64_t bytes;
/usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t'
  uint64_t cookie_addr;
/usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t'
  uint64_t  cookie_addr;
/usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t'
  uint64_t  flags;
/usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t'
  uint64_t local_vec_addr;
/usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t'
  uint64_t nr_local;
/usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t'
  uint64_t  local_addr;
/usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t'
  uint64_t  remote_addr;
/usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t'
    uint64_t compare_mask;
/usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t'
    uint64_t swap_mask;
/usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t'
    uint64_t nocarry_mask;
/usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t'
  int32_t  status;

Signed-off-by: Dmitry V. Levin 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

scsi: scsi_dh_emc: return success in clariion_std_inquiry()

2017-10-21T15:07:26+00:00

[ Upstream commit 4d7d39a18b8b81511f0b893b7d2203790bf8a58b ]

We accidentally return an uninitialized variable on success.

Fixes: b6ff1b14cdf4 ("[SCSI] scsi_dh: Update EMC handler")
Signed-off-by: Dan Carpenter 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock

2017-10-21T15:07:26+00:00

[ Upstream commit 439a36b8ef38657f765b80b775e2885338d72451 ]

We are in the situation that we have to avoid recursive cluster locking,
but there is no way to check if a cluster lock has been taken by a precess
already.

Mostly, we can avoid recursive locking by writing code carefully.
However, we found that it's very hard to handle the routines that are
invoked directly by vfs code.  For instance:

  const struct inode_operations ocfs2_file_iops = {
      .permission     = ocfs2_permission,
      .get_acl        = ocfs2_iop_get_acl,
      .set_acl        = ocfs2_iop_set_acl,
  };

Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):

  do_sys_open
   may_open
    inode_permission
     ocfs2_permission
      ocfs2_inode_lock() <=== first time
       generic_permission
        get_acl
         ocfs2_iop_get_acl
  	ocfs2_inode_lock() <=== recursive one

A deadlock will occur if a remote EX request comes in between two of
ocfs2_inode_lock().  Briefly describe how the deadlock is formed:

On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
the remote EX lock request.  Another hand, the recursive cluster lock
(the second one) will be blocked in in __ocfs2_cluster_lock() because of
OCFS2_LOCK_BLOCKED.  But, the downconvert never complete, why? because
there is no chance for the first cluster lock on this node to be
unlocked - we block ourselves in the code path.

The idea to fix this issue is mostly taken from gfs2 code.

1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track
   of the processes' pid who has taken the cluster lock of this lock
   resource;

2. introduce a new flag for ocfs2_inode_lock_full:
   OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for
   us if we've got cluster lock.

3. export a helper: ocfs2_is_locked_by_me() is used to check if we have
   got the cluster lock in the upper code path.

The tracking logic should be used by some of the ocfs2 vfs's callbacks,
to solve the recursive locking issue cuased by the fact that vfs
routines can call into each other.

The performance penalty of processing the holder list should only be
seen at a few cases where the tracking logic is used, such as get/set
acl.

You may ask what if the first time we got a PR lock, and the second time
we want a EX lock? fortunately, this case never happens in the real
world, as far as I can see, including permission check,
(get|set)_(acl|attr), and the gfs2 code also do so.

[sfr@canb.auug.org.au remove some inlines]
Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.com
Signed-off-by: Eric Ren 
Reviewed-by: Junxiao Bi 
Reviewed-by: Joseph Qi 
Cc: Stephen Rothwell 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

crypto: xts - Add ECB dependency

2017-10-21T15:07:26+00:00

[ Upstream commit 12cb3a1c4184f891d965d1f39f8cfcc9ef617647 ]

Since the
   commit f1c131b45410a202eb45cc55980a7a9e4e4b4f40
   crypto: xts - Convert to skcipher
the XTS mode is based on ECB, so the mode must select
ECB otherwise it can fail to initialize.

Signed-off-by: Milan Broz 
Signed-off-by: Herbert Xu 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs

2017-10-21T15:07:26+00:00

[ Upstream commit 95f1ba9a24af9769f6e20dfe9a77c863f253f311 ]

In the VF driver, module parameter mlx4_log_num_mgm_entry_size was
mistakenly overwritten -- and in a manner which overrode the
device-managed flow steering option encoded in the parameter.

log_num_mgm_entry_size is a global module parameter which
affects all ConnectX-3 PFs installed on that host.
If a VF changes log_num_mgm_entry_size, this will affect all PFs
which are probed subsequent to the change (by disabling DMFS for
those PFs).

Fixes: 3c439b5586e9 ("mlx4_core: Allow choosing flow steering mode")
Signed-off-by: Majd Dibbiny 
Reviewed-by: Jack Morgenstein 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Btrfs: send, fix failure to rename top level inode due to name collision

2017-10-21T15:07:26+00:00

[ Upstream commit 4dd9920d991745c4a16f53a8f615f706fbe4b3f7 ]

Under certain situations, an incremental send operation can fail due to a
premature attempt to create a new top level inode (a direct child of the
subvolume/snapshot root) whose name collides with another inode that was
removed from the send snapshot.

Consider the following example scenario.

Parent snapshot:

  .                 (ino 256, gen 8)
  |---- a1/         (ino 257, gen 9)
  |---- a2/         (ino 258, gen 9)

Send snapshot:

  .                 (ino 256, gen 3)
  |---- a2/         (ino 257, gen 7)

In this scenario, when receiving the incremental send stream, the btrfs
receive command fails like this (ran in verbose mode, -vv argument):

  rmdir a1
  mkfile o257-7-0
  rename o257-7-0 -> a2
  ERROR: rename o257-7-0 -> a2 failed: Is a directory

What happens when computing the incremental send stream is:

1) An operation to remove the directory with inode number 257 and
   generation 9 is issued.

2) An operation to create the inode with number 257 and generation 7 is
   issued. This creates the inode with an orphanized name of "o257-7-0".

3) An operation rename the new inode 257 to its final name, "a2", is
   issued. This is incorrect because inode 258, which has the same name
   and it's a child of the same parent (root inode 256), was not yet
   processed and therefore no rmdir operation for it was yet issued.
   The rename operation is issued because we fail to detect that the
   name of the new inode 257 collides with inode 258, because their
   parent, a subvolume/snapshot root (inode 256) has a different
   generation in both snapshots.

So fix this by ignoring the generation value of a parent directory that
matches a root inode (number 256) when we are checking if the name of the
inode currently being processed collides with the name of some other
inode that was not yet processed.

We can achieve this scenario of different inodes with the same number but
different generation values either by mounting a filesystem with the inode
cache option (-o inode_cache) or by creating and sending snapshots across
different filesystems, like in the following example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/a1
  $ mkdir /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap1
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ touch /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap2
  $ btrfs receive /mnt -f /tmp/1.snap
  # Take note that once the filesystem is created, its current
  # generation has value 7 so the inode from the second snapshot has
  # a generation value of 7. And after receiving the first snapshot
  # the filesystem is at a generation value of 10, because the call to
  # create the second snapshot bumps the generation to 8 (the snapshot
  # creation ioctl does a transaction commit), the receive command calls
  # the snapshot creation ioctl to create the first snapshot, which bumps
  # the filesystem's generation to 9, and finally when the receive
  # operation finishes it calls an ioctl to transition the first snapshot
  # (snap1) from RW mode to RO mode, which does another transaction commit
  # and bumps the filesystem's generation to 10.
  $ rm -f /tmp/1.snap
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt
  $ btrfs receive /mnt /tmp/1.snap
  # Receive of snapshot snap2 used to fail.
  $ btrfs receive /mnt /tmp/2.snap

Signed-off-by: Robbie Ko 
Reviewed-by: Filipe Manana 
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman