linux-stable.git, branch v3.12.28

Linux 3.12.28

2014-09-03T19:31:33+00:00

hpsa: fix bad -ENOMEM return value in hpsa_big_passthru_ioctl

2014-09-03T19:31:32+00:00

commit 0758f4f732b08b6ef07f2e5f735655cf69fea477 upstream.

When copy_from_user fails, return -EFAULT, not -ENOMEM

Signed-off-by: Stephen M. Cameron 
Reported-by: Robert Elliott 
Reviewed-by: Joe Handzik 
Reviewed-by: Scott Teel 
Reviewed by: Mike MIller 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jiri Slaby

x86/xen: resume timer irqs early

2014-09-03T19:31:32+00:00

commit 8d5999df35314607c38fbd6bdd709e25c3a4eeab upstream.

If the timer irqs are resumed during device resume it is possible in
certain circumstances for the resume to hang early on, before device
interrupts are resumed.  For an Ubuntu 14.04 PVHVM guest this would
occur in ~0.5% of resume attempts.

It is not entirely clear what is occuring the point of the hang but I
think a task necessary for the resume calls schedule_timeout(),
waiting for a timer interrupt (which never arrives).  This failure may
require specific tasks to be running on the other VCPUs to trigger
(processes are not frozen during a suspend/resume if PREEMPT is
disabled).

Add IRQF_EARLY_RESUME to the timer interrupts so they are resumed in
syscore_resume().

Signed-off-by: David Vrabel 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: Jiri Slaby

x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub

2014-09-03T19:31:31+00:00

commit 7b2a583afb4ab894f78bc0f8bd136e96b6499a7e upstream.

Without CONFIG_RELOCATABLE the early boot code will decompress the
kernel to LOAD_PHYSICAL_ADDR. While this may have been fine in the BIOS
days, that isn't going to fly with UEFI since parts of the firmware
code/data may be located at LOAD_PHYSICAL_ADDR.

Straying outside of the bounds of the regions we've explicitly requested
from the firmware will cause all sorts of trouble. Bruno reports that
his machine resets while trying to decompress the kernel image.

We already go to great pains to ensure the kernel is loaded into a
suitably aligned buffer, it's just that the address isn't necessarily
LOAD_PHYSICAL_ADDR, because we can't guarantee that address isn't in-use
by the firmware.

Explicitly enforce CONFIG_RELOCATABLE for the EFI boot stub, so that we
can load the kernel at any address with the correct alignment.

Reported-by: Bruno Prémont 
Tested-by: Bruno Prémont 
Cc: H. Peter Anvin 
Signed-off-by: Matt Fleming 
Signed-off-by: Jiri Slaby

x86_64/vsyscall: Fix warn_bad_vsyscall log output

2014-09-03T19:31:31+00:00

commit 53b884ac3745353de220d92ef792515c3ae692f0 upstream.

This commit in Linux 3.6:

    commit c767a54ba0657e52e6edaa97cbe0b0a8bf1c1655
    Author: Joe Perches 
    Date:   Mon May 21 19:50:07 2012 -0700

        x86/debug: Add KERN_ to bare printks, convert printks to pr_

caused warn_bad_vsyscall to output garbage in the middle of the
line.  Revert the bad part of it.

The printk in question isn't actually bare; the level is "%s".

The bug this fixes is purely cosmetic; backports are optional.

Signed-off-by: Andy Lutomirski 
Link: http://lkml.kernel.org/r/03eac1f24110bbe496ecc12a4df467e0d88466d4.1406330947.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin 
Signed-off-by: Jiri Slaby

x86: don't exclude low BIOS area when allocating address space for non-PCI cards

2014-09-03T19:31:30+00:00

commit cbace46a9710a480cae51e4611697df5de41713e upstream.

Commit 30919b0bf356 ("x86: avoid low BIOS area when allocating address
space") moved the test for resource allocations that fall within the first
1MB of address space from the PCI-specific path to a generic path, such
that all resource allocations will avoid this area.  However, this breaks
ISA cards which need to allocate a memory region within the first 1MB.  An
example is the i82365 PCMCIA controller and derivatives like the Ricoh
RF5C296/396 which map part of the PCMCIA socket memory address space into
the first 1MB of system memory address space.  They do not work anymore as
no usable memory region exists due to this change:

  Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
  host opts [0]: none
  host opts [1]: none
  ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10
  pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff
  pcmcia_socket pcmcia_socket1: cs: unable to map card memory!

If filtering out the first 1MB is reverted, everything works as expected.

Tested-by: Robert Resch 
Signed-off-by: Christoph Schulz 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Jiri Slaby

PCI: Configure ASPM when enabling device

2014-09-03T19:31:30+00:00

commit 1f6ae47ecff7f23da73417e068018b311f3b5583 upstream.

We can't do ASPM configuration at enumeration-time because enabling it
makes some defective hardware unresponsive, even if ASPM is disabled later
(see 41cd766b0659 ("PCI: Don't enable aspm before drivers have had a chance
to veto it").  Therefore, we have to do it after a driver claims the
device.

We previously configured ASPM in pci_set_power_state(), but that's not a
very good place because it's not really related to setting the PCI device
power state, and doing it there means:

  - We incorrectly skipped ASPM config when setting a device that's
    already in D0 to D0.

  - We unnecessarily configured ASPM when setting a device to a low-power
    state (the ASPM feature only applies when the device is in D0).

  - We unnecessarily configured ASPM when called from a .resume() method
    (ASPM configuration needs to be restored during resume, but
    pci_restore_pcie_state() should already do this).

Move ASPM configuration from pci_set_power_state() to
do_pci_enable_device() so we do it when a driver enables a device.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79621
Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Suggested-by: Bjorn Helgaas 
Signed-off-by: Vidya Sagar 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Jiri Slaby

drm/radeon: add additional SI pci ids

2014-09-03T19:31:30+00:00

commit 37dbeab788a8f23fd946c0be083e5484d6f929a1 upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Jiri Slaby

drm/radeon: add new bonaire pci ids

2014-09-03T19:31:29+00:00

commit 5fc540edc8ea1297c76685f74bc82a2107fe6731 upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Jiri Slaby

drm/radeon: add new KV pci id

2014-09-03T19:31:28+00:00

commit 6dc14baf4ced769017c7a7045019c7a19f373865 upstream.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=82912

Signed-off-by: Alex Deucher 
Signed-off-by: Jiri Slaby